11
Installation Guide: EV wall charger and EV wall charger plug-in
EV WALL CHARGER AND EV WALL CHARGER PLUG-IN
www.eaton.com
EV WALL CHARGER AND EV WALL CHARGER PLUG-IN INSTALLATION
Prepare the EV wall charger
A
STEP A-1
Plug-in
Reference:
1.
NEMA 14-50R receptacle
2.
NEMA 14-50 cord
Figure 2
1
1
2
• Ensure the EV wall charger’s dedicated 40 A upstream breaker handle
is in the OFF position .
Note: Eaton recommends use of a BR240H circuit breaker or
equivalent 240 V rated two-pole device. Ensure to follow local code
requirements.
• Set aside hardware kit and mounting template .
• Before you get started, ensure the available NEMA 14-50R receptacle
(1)
is 18 inches minimum from the ground for indoor applications and
24 inches minimum from the ground in outdoor applications .
• Remove EV wall charger from the plastic bag .
• Remove the tape on the side(s) of the EV wall charger that is holding
the cover to the base . Remove the cover and set aside cautiously to
avoid damage to the circuit board .
24" min
18" min
