IL05001002E.pdf
4
CR (CONTROL REGISTER)
CR No.
Type
Register
Descrip ion
HW
LW
#0
R
Model NO
Read only; ELC-COENETM model NO.=H’4050
#1
R
Firmware version
System firmware version; The type is hex. For
example, H’0100 means the firmware version is v1.00.
#2
R
Communication Mode
b0
Modbus TCP Mode set ing
b1
Data Exchange Mode setting
#3
W
E-Mail Event 1 Trigger
Set to 1 to send the E-mail 1.
#4
W
E-Mail Event 2 Trigger
Set to 1 to send the E-mail 2.
#5
W
E-Mail Event 3 Trigger
Set to 1 to send the E-mail 3.
#6
W
E-Mail Event 4 Trigger
Set to 1 to send the E-mail 4.
#7
R
E-Mail 1, 2 Status Register
b0~b7
Status of E-Mail 2 b8~b15
Status of E-Mail
1
#8
R
E-Mail 3, 4 Status Register
b0~b7
Status of E-Mail 4 b8~b15
Status of E-Mail
3
#9
R/W E-Mail 1 Additional Message
User defined message to be sent by email.
#10
R/W E-Mail 2 Additional Message
User defined message to be sent by email.
#11
R/W E-Mail 3 Additional Message
User defined message to be sent by email.
#12
R/W E-Mail 4 Additional Message
User defined message to be sent by email.
#13
R/W Data Exchange trigger
Set to 1 to start the Data Exchange transaction.
#14
R
Data Exchange Status Register
Status of Data Exchange transaction
#15
R/W Remote I/O mapping Trigger
Set to 1 to start the Remote I/O mapping.
#16
R/W Status of Remote I/O slaves
CR#16 b0 ~ b3: Connection status of Remote I/O
mapping slave 1 ~ 4
#17
R/W Data Exchange cycle ime
Minimum cycle time (ms) of Data Exchange command
#19
#18
R
Error status of Data Exchange
slaves
CR#19 b0 ~ b15: Status of Data Exchange slave 1~ 16
CR#18 b0 ~ b8: Status of Data Exchange slave 17~ 24
Status = 1 when an error occurs.
#24 ~ #20
-
Reserved
Reserved
#26
#25
R/W Des ination IP
Des ination IP address for Data Exchange
#27
-
Reserved Reserved
#28
R/W Des ination Slave ID
Des ination Slave ID for Data Exchange
#48 ~ #29
R/W Default Transmission Buffer
Transmitted data buffer for Data Exchange Mode
#68 ~ #49
R
Default Received Buffer
Received data buffer for Data Exchange Mode
#80 ~ #69
-
Reserved
Reserved
#81
R/W Slave Transmission Buffer Address Slave Transmission buffer Address for Data Exchange
#82
R/W Number of Received Registers
Number of Received Registers
#83
R/W Master Received Buffer Address
Master Received Buffer Address for Data Exchange
#84
R/W Slave Received Buffer Address
Slave Received Buffer Address for Data Exchange
#85
R/W Number of Sending Registers
Number of Sending Registers
#86
R/W
Master Transmission Buffer
Address
Master Transmission Buffer Address for Data
Exchange
#87
R/W DHCP/Static IP
Select DHCP Mode or Static IP
#89
#88
R/W IP Address
IP Address
#91
#90
R/W Subnet Mask
Subnet Mask of ELC-COENETM
#93
#92
R/W Gateway IP
Default Gateway IP Address
#94
R/W IP Change Trigger
Set to 1 to modify IP Address
#95
R/W DHCP Status
Status of IP address setting
#110 ~ #96
-
Reserved
Reserved
#111 R/W Modbus TCP Operating Mode
Set to 1 to configure Modbus TCP for 8-bit mode.
#112 R/W Modbus TCP Keep-Alive Time-out
Modbus TCP Keep-Alive Time-out (s)
#113 -
Reserved
Reserved
#114 R/W Modbus TCP Time-Out
Modbus TCP transaction time-out (ms)
#115 R/W Modbus TCP Trigger
Set to 1 to send Modbus command.
#116 R/W Modbus TCP Status Register
Status of Modbus TCP transaction
