Eaton EASY222-DN, Руководство пользователя

Страница: 252 / 284

easy800/MFD control
commands
248
09/10 MN05013007Z-EN
Table 164: Index 0 – Bit IO
1) On receipt of a rising edge, all entries are removed from the
table. The number of table entries QN is set to 0.
2) On receipt of a rising edge the newest entry in the table is
output at output QV and removed from the table.
The number of table entries QN is decremented by one.
3) On receipt of a rising edge the oldest entry in the table is output
at output QV and removed from the table. The number of table
entries QN is decremented by one.
4) On receipt of a rising edge, the value of I1 is transferred to the
table and the number of table entries is incremented by one, as
long as the maximum number of entries is not exceeded.
In this case, the value of I1 is output at the output QV.
5) Reset coil: Status 1 resets the counter actual value to zero.
6) 1 is set if the table is full.
7) 1 is set if the table is empty.
Bit 7 6 5 4 3 2 1 0
FB input Data 1 – – – RE
1)
RL
2)
RF
3)
WP
4)
EN
5)
FB output Data 3 – – – – – – TF
6)
TE
7)
h Further information on this module is provided in the
easy800 manual (MN04902001Z-EN, previous description
AWB2528-1423GB) or in the easySoft Help.