Eaton Cutler-Hammer Enclosed IQ, Инструкция

Страница: 4 / 28

Effective 1/98
Page 4
I.B. CBE-IQ01
SECTION 1:
INTRODUCTION
1.1 PRELIMINARY COMMENTS AND
SAFETY PRECAUTIONS
This technical document is intended to cover most
aspects associated with the installation, application,
operation, and maintenance of Enclosed IQ equipment.
It is provided as a guide for authorized and qualified
personnel only.
1.2 WARRANTY AND LIABILITY INFORMATION
No warranties, expressed or implied, including
warranties of fitness for a particular purpose of
merchantability, or warranties arising from course of
dealing or usage of trade, are made regarding the
information, recommendations, and descriptions
contained herein. In no event will Cutler-Hammer be
responsible to the purchaser or user in contract, in tort
(including negligence), strict liability, or otherwise for any
special, indirect, incidental, or consequential damage or
loss whatsoever, including but not limited to damage or
loss of use of equipment, plant or power system, cost of
capital, loss of power, additional expenses in the use of
existing power facilities, or claims against the purchaser
or user by its customers resulting from the use of the
information and descriptions contained herein.
1.3 SAFETY PRECAUTIONS
All safety codes, safety standards and/or regulations
must be strictly observed in the installation, operation,
and maintenance of this device.
CAUTION
COMPLETELY READ AND UNDERSTAND THE
MATERIAL PRESENTED IN THIS DOCUMENT
BEFORE ATTEMPTING INSTALLATION, OPERATION,
OR APPLICATION OF THE EQUIPMENT. IN
ADDITION, ONLY QUALIFIED PERSONS SHOULD BE
PERMITTED TO PERFORM ANY WORK
ASSOCIATED WITH THE EQUIPMENT. ANY WIRING
INSTRUCTIONS PRESENTED IN THIS DOCUMENT
MUST BE FOLLOWED PRECISELY. FAILURE TO DO
SO COULD CAUSE PERMANENT EQUIPMENT
DAMAGE.
REFER ALSO TO IQ DEVICE INSTRUCTION BOOKS.
REFER TO INSTRUCTION BOOK TD17530 IF YOUR
ENCLOSURE IS EQUIPPED WITH AN IQ ANALYZER.
REFER TO INSTRUCTION BOOK TD17548 IF YOUR
ENCLOSURE IS EQUIPPED WITH AN IQ DP-4000.