Cutler-Hammer
Pittsburgh, Pennsylvania U.S.A.
Effective 11/02 (ISI)
Style IL01603008E H01
Printed in U.S.A.
Page 2
IL01603008E
2.0 AIR FILTER INSTALLATION
Step 1: With the wire mesh side visible, slide the new
air filter into the vertical filter brackets until the bottom of
the filter is aligned with the bottom of the vertical filter
brackets (Figure 5).
Step 2: Replace the lower horizontal filter bracket and
secure with the two 1/4-20 screws that were removed
previously (Figure 6).
Step 3: Replace the upper horizontal filter bracket and
secure with the two 1/4-20 screws that were removed
previously (Figure 7).
MAKE CERTAIN THAT ALL PANELS ARE
REPLACED COMPLETELY USING ALL THE SCEWS
THAT WERE REMOVED. FAILURE TO REPLACE
ALL SCREWS COULD PERMIT UNAUTHORIZED
ACCESS TO LIVE PARTS WHICH COULD CAUSE
PERSONAL INJURY AND/OR DEATH.
!
WARNING
Figure 5 Installing New Air Filter
Figure 6 Lower Horizontal Bracket/Screw Replacement
Figure 7 Upper Horizontal Bracket/Screw Replacement
