2
Installation Instructions – Jaylum Suspended LED Luminaire
Mount Spacing
Cable/Gripper Installation
Note:
N
Please refer to Corelite “Connection at Ceiling”
instructions for detailed information on various
mounting methods.
Figurt 2.
*Fixture Shown with
LED Downlight Kit
Fixture Length
Fixture Length
*For Continuous Rows See Joining Sheet.
Power
Sample Row
96” Spacing
96” Spacing
J-BOX
(by others)
Power Feed
Non-Power Feed
Cable
Coupler
Cable
Coupler
Cable
Cable
Cable Crimp
SJT Cord
InsoallaoiNn InsorucoiNns – Jaylum Susptndtd LED Luminairt
ADE141250 www.eaton.com
Slide Cable Coupler onto Main Suspension Cable and
secure Coupler to appropriate mounting point at ceiling.
(Figure 2.)
Install Cable Gripper onto Main Suspension Cable.
Insert Cross Cable into Cable Gripper and install
thumbscrew. Loosen thumbscrew to level fixture.
Re-tighten as necessary once fixture leveling has been
completed.
Adjust Main Cable to desired length and cut excess cable if
necessary. (Figure 4.)
Note:
N
Install CABLE CRIMP prior to cutting cable.
Figurt 3.
Figurt 4.
Figurt 5.
INSTALLATION
CrNss Cablt InsoallaoiNn
Connection at Fixture
1. Insert Barrel Terminal into corner hole. (Figure 1.)
2. Fully insert Toggle through corner hole.
12” Aircraft Cable with Barrel
Terminals and Steel Toggles
(included).
Figurt 1.
Power Drops/Knock-Outs
5/8”-7/8” Knock Out
Break off appropriate KO, slide power cord through KO
opening, then secure power cord with strain relief.
Note:
N
Location of the KO’s varies depending on fixture
Tilt vertically to pass
through mounting hole.
Figurt 6.