5
Disc Valve Hydraulic Motor
10 000 Series
Geroler Motors—Two Speed
Valve
Valve
Plate
Valve
Drive
Figure 6
Seals
Valve
Plate
Seals
Figure 7
Splined
Drive
Thrust
Washer
Wear
Plate
Thrust
Bearing
Figure 8
11 Remove the valve.
12 Remove the valve plate.
13 Remove the valve drive.
14 Remove the Geroler. Be sure to keep the Geroler star and rollers
within the outer ring if they are loose.
15 Remove the 108 mm [4.25 in.] seal and 9,5 mm [.375 in.] o-ring
from each side of the Geroler.
16 Remove the splined drive.
17 Remove the wear plate.
18 Remove the rear thrust bearing and rear thrust washer. These parts
will either be on the wear plate or shaft bearings.
Disassembly
O-ring
Plug/O-ring
Plug/O-ring
Seal
Figure 9
