2
Quick installation manual Web Compact Controller
ZNO2050500 C 05/2021 www.eaton.com
Description /
application area
This short instruction manual describes
only a quick commissioning procedure of
the Web Compact Controller. A
complete Installation and Operating
Safety notes
CAUTION
The Web Compact Controller
interface must be
operated in an undamaged ad functional
state.
This equipment is intended for use in
restricted area, and must be installed
within 2 meters high, in the restricted
area that only qualified people can
access. This equipment is not suitable for
use in locations where children are likely
to be present.
When carrying out maintenance work to
the device the device must be switched
off. When carrying out device main-
tenance, observe national safety and
accident prevention regulations and the
safety notes in the operating instructions
below designated with
.
Only skilled person is allowed to change
a component providing a safeguard
function.
Before removing Web Compact
Controller for maintenance, replacement
and/or repair all power should be
disconnected.
An appropriate disconnect device shall
be provided as part of the building instal-
lation .
Web Compact Controller must
be earthed.
CYBERSECURITY
This chapter provides guidelines to securely
deploy the Web Compact Controller
and minimize the cybersecurity risk to the
installer system.
•
Asset identification and inventory:
Ensure that the Web Compact
Controller is labelled and inventoried
using the Part number and MAC address
printed on the product label, the IP
address configured during the installa-
tion of the material and actual firmware
version.
•
Restrict Physical access:
Ensure that
physical access to the Web
Compact Controller is restricted only
to authorized user(s). Web
Compact Controller
supports the physical access ports RJ-45,
USB that can be used to tamper the
device. Access to these ports should be
restricted to authorized personnel only.
Secure the facility and equipment rooms
or closets with access control mecha-
nisms such as locks, entry card readers,
guards, man traps, CCTV, etc. as appro-
priate. Monitor and log the access at all
times. Before connecting any portable
device through a USB port or SD card
slot, scan the device to prevent unau-
thorized access.
•
Restrict Logical access:
Access to ‘Admin’
& ‘Service’ user accounts should be
GB
Compliant with:
Audio,video,information and communica-
tion technology equipment-part 1:safety
requirement : EN62368-1
Lamp controlgear-General and Safety
requirement- EN61347-1
Developed, manufactured and tested ac-
cording to DIN EN ISO 9001.
Instuction are downloadable from the web-
site of the Web Compact Controller.
Commissioning and
modifying network settings
Please connect a patch cable with RJ45 plugs
between the Compact Controller and a PC
(e.g. notebook).
