Eaton BreakerVisu NZM-XMC-MDISP35-MOD, Руководство пользователя

Страница: 27 / 88

2 Operator interface
2.6 “Energy Logging” screen
BreakerVisu 06/16 MN01210001Z-EN www.eaton.com
25
2.6 “Energy Logging” screen
This screen can be used to activate the power monitoring function.
Please note that data will only be acquired for devices with trip blocks that
output power data (Table 2, page 8). When the power monitoring function is
running, the
Energy logging status circle will flash. Also note that the
power monitoring function can only be configured when the BreakerVisu
console is unlocked (
￫ Section 2.7, ““Extras” screen” ).
2.6.1 7“ variant
Figure 18:"Energy Logging" screen (7“ variant)
The status information in ￫ Figure 18 shows a BreakerVisu system with an
unlocked panel lock (see the Help pane: “Entries active. Please select
logging rate”). In it, the power monitoring function is turned on, with green
circles indicating the selected scan rate. The screen also shows that data has
been stored in the EV
_energy_15m.csv
file and that the first day value is
waiting for the next measuring interval.
Table 19: Overview screen controls (7“ variant)
Control Action
Tapping this button will make the system store the trip block‘s power value at
15-minute intervals starting the moment an hour starts (for example: 00:00,
00:15, 00:30, 00:45, etc.). A green circle indicates that the measuring function
is running.
Tapping this button will make the system store the trip block‘s power value at
the beginning of every hour.
Tapping this button will make the system store the trip block‘s power value
every day at 00:00 (12:00 a.m.).
Tapping this button will make the system store the trip block‘s power value at
00:00 the first day of every week. A white circle indicates that the measuring
function is turned off; a green circle indicates that it is running.
Tapping this button will make the system store the trip block‘s power value at
00:00 the first day of every month.
Tapping this button will make the system store the trip block‘s power value at
00:00 the first day of every year.