Eaton ARRAY 3A3 Pro, Руководство пользователя

Страница: 54 / 103

Maintenance
1. Working environment and storage means can affect the service term and reliability of this product to some
extent. Therefore, the product is not suitable for performance in the following environment:
2. For long-term inaction, UPS (without batteries) should be kept in dry environment with temperature
ranging from -25-+55
℃
. Before start-up, ambient temperature should be brought back to 0 or above for a
certain period of time (above 2 hours).
A. Locations where temperature exceeds the maximum or goes below the minimum temperature as
required by technical specifications or humidity is improper (temperature range: 0-40
℃
; relative
humidity range: 20-90%).
B. Locations where vibration and collision are constant;
C. Locations where metallic dusts
，
corrosive substances as well as salts and inflammable gases are
present.
Battery Safety
1. Battery service lifetime will be shortened as ambient temperature rises. Replace batteries periodically to
guarantee normal UPS performance and sufficient back-up time.
2. Only personnel with proper expertise can carry out the maintenance of accumulator batteries.
3. Replacement of accumulator batteries requires a match of same type and model with equal quantity.
4. As accumulator batteries may contain potential electric shock and short-circuit current danger, to avoid
accidents that might be thus resulted, the following warnings should be observed during battery replacement:
5. Do not expose accumulator battery to fire in order to avoid possible explosion that might endanger physical
safety.
6. Non-professionals are not allowed to open or destroy accumulator batteries for electrolytes in batteries
contain strong acid and other dangerous substances which will cause damages to both human skins and eyes.
Should electrolytes come into any contact with human body unintentionally, rinse with clean water and seek
medical advice.
7. Do not cause battery positive and negative polarity short circuit otherwise electric shock or inflammation
may occur.
A. Do not wear watches, rings or similar metallic items;
B. Use insulated tools;
C. Put on rubber shoes and gloves;
D. Do not place metallic tools or similar metallic parts on the batteries;
E. Switch off load connected to the batteries before dismantling battery connection terminals.