Open flap and mount
luminaire to surface
using the two fixing
holes (ø12.8mm) on the
back of the mounting arm
(as shown bottom right).
Once secure,
wire terminations
and place the flap back
into position and secure
with the two screws.
Set the Aethon to face in the correct
direction and fix into
position by tightening
the bolts from the bracket to the luminaire.
1
Installation
B
Make terminal connections
and fix end plate back into
position.
Large
Small
A
20.0
80.0
ø20.0
ø5.0
100.0
ø20.0
ø12.0
Fix bracket to surface using below
fixing detail.
C
Large Yoke
Installation
Mounting Arm
Remove screws (x2)
to release flap for
mounting arm.
A
38
0
.8
B
Installation
Pole Mounting Arm
Installation
Two Piece Bracket
Locate luminaire
onto pole and lock
into position with
two bolts.
Fixing Dimensions
10
6
.0
All values in mm
ø
63.9
ø
6.9 (x4)
31
.0
ø
9.0 (x4)
Set angle of bracket
and fix with a
locking screw.
Ensure holes
in the bracket
are aligned
before
fixing
position
B
Fix bracket to chosen surface. Use
fixing details as shown below.
To the luminaire
To the surface
A
ø
31.0
ø
8.0 (x2)
5
0
.0
ø
20.5
16.1
74.0
