DPD-9E2305
17
1.
2.
5.7 Eaton Intelligent Power Software suite
Eaton Intelligent Power Software suite is available from
.
Eaton Software suite provides up-to-date graphics of UPS power and system data and power flow.
It also gives you a complete record of critical power events, and it notifies you of important UPS or power information.
If there is a power outage and the 9E UPS battery power becomes low, Eaton Software suite can automatically shut down
your computer system to protect your data before the UPS shutdown occurs.
5.8 Cybersecurity
Eaton is committed to minimizing the Cybersecurity risk in its products and employs cybersecurity best practices and the
latest cybersecurity technologies in its products and solutions, making them more secure, reliable and competitive for
our customers. Eaton also offers Cybersecurity Best Practices whitepapers to its customers, referenced at
.
6 Operation
6.1 Start-up and normal operation
Check that the indications on the name plate located on the back of the UPS meets to the AC power source and the
true electrical consumption of the total load.
Battery charge
The UPS charges the battery as soon as it is connected to the AC outlet, whether the ON/OFF button is pressed or not. It is
recommended that the UPS be permanently connected to the AC power supply to ensure the best possible autonomy.
6.2 Starting the UPS on battery
Before using this feature, the UPS must have been powered by utility power with output enabled at least once.
Battery start can be disabled. See the "Cold start" setting in "
To start the UPS on battery:
When the UPS is disconnected from the AC power source, press the
button on the UPS front panel.
The UPS transfers from Standby mode to Battery mode.
The UPS supplies power to your equipment.
Check the UPS front panel display for active alarms or notices besides the "Battery mode" and related notifications
that indicates missing utility power. Resolve any active alarms before continuing. See "
".
Check the UPS status from the front panel to view the active alarms. Correct the alarms and restart if necessary.
6.3 UPS shutdown
To shut down the UPS:
Press the
button on the front panel for two seconds.
6.4 Operating modes
The Eaton 9E front panel indicates the UPS status through the UPS indicators located above the LCD screen.
Normal mode
Optional High Efficiency and Energy Saving settings minimize heat contribution to the rack environment. See user
settings.