Eaton 93PM-L IAC-B, Инструкция по установке и эксплуатации

Страница: 35 / 162

Eaton 93PM-L 20–200kW (208V) UPS Installation and Operation Manual 164000724—Rev 01 25
Table 6. Input/Output Ratings and Wiring Recommendations: 60–100 kW (208/208)
Basic Unit Rating
Units
Rating 50/60 Hz
kW 60 70 80 90 100
Input and Output Voltage Volts 208/208 208/208 208/208 208/208 208/208
AC Input to UPS Rectifier (0.99
Minimum pF)
Full load current plus battery recharge
current
(3) Phases, (1) Ground
A
Amps 213 249 284 320 355
Minimum Conductor Size (Phase A, B,
and C)
Number per Phase AWG or
kcmil
(each)
350 MCM
(1)
500 MCM
(1)
4/0
(2)
4/0
(2)
250 MCM
(2)
Minimum Conductor Size (Ground)
Number
–
AWG or
kcmil
(each)
2
(1)
1/0
(1)
2
(2)
2
(2)
2
(2)
AC Input to UPS Bypass (Four Wire,
Dual-Feed)
Full Load Current (3) Phases – see Note,
(1) Ground
B
Amps 213 249 284 320 355
Neutral Current
Amps 288 337 385 433 481
Minimum Conductor Size (Phase A, B,
and C)
Number per Phase AWG or
kcmil
(each)
500 MCM
(1)
4/0
(2)
250 MCM
(2)
300 MCM
(2)
400 MCM
(2)
Neutral Wire Size
Number AWG or
kcmil
(each)
300 MCM
(2)
350 MCM
(2)
500 MCM
(2)
3/0
(4)
4/0
(4)
Minimum Conductor Size (Ground)
Number
–
AWG or
kcmil
(each)
1/0
(1)
2
(2)
2
(2)
2
(2)
1/0
(2)
DC Input from External Battery (Line-Up-and-Match Eaton 93PM-L IBC-SW, IBC-LW or IBC-LHW)
For Line-Up-and-Match wiring refer to Eaton 93PM Integrated Battery Cabinet Installation Manual-Small Welded or Eaton 93PM
Universal Integrated Battery Cabinet Installation Manual-Large and Large High Rate
DC Input from External Battery
(Standalone Eaton 93PM-L IBC)
(1) Positive, (1) Negative, (1) Ground
C
Total
Amps
136 158 181 203 226
Minimum Conductor Size (Phase
Positive and Negative)
Number per Pole AWG or
kcmil
(each)
2/0
(1)
3/0
(1)
4/0
(1)
250 MCM
(1)
300 MCM
(1)
Minimum Conductor Size (Ground)
Number
–
AWG or
kcmil
(each)
4
(1)
4
(1)
2
(1)
2
(1)
2
(1)
UPS Installation Plan and Unpacking