•
Industrial Relay Card (INDRELAY-MS)
The MiniSlot Industrial Relay Card provides a way of connecting the UPS to industrial and electrical
monitoring systems. It also enables a wide range of control applications by allowing up to 250 volts
and 5 Amperes through its 5 relay connections. By connecting wires to the corresponding places in its
terminal blocks, you can choose Normally Open or Normally Closed setup for each output.
For information on how to configure Industrial Relay Card, see
Section
Figure 32. Industrial Relay Card
6
6..1
1..2
2
IInntteelllliiggeenntt PPoow
weerr SSooffttw
waarree
Intelligent Power Software suite consists of productivity tools for UPS power management. These
software solutions enhance the protection provided by a UPS by shutting down applications and operating
systems, triggering disaster recovery procedures and migrating virtual machines in case of an extended
power outage. They also help in reducing downtime and increasing the reliability of the UPS by alarming
the operators of issues and monitoring vital meters. The software tools can also be used to view the usage
characteristics of power equipment across the enterprise and use the data to optimize the use of the
facilities.
Intelligent Power Software suite is web-based, which means that the information can be accessed through
any device that has a web browser.
On one hand,
Intelligent Power Manager (IPM)
is a monitoring system that can concentrate the data and
alarms of hundreds of UPS, ePDU and other devices into a single view. On the other hand, it provides a
link to virtualization through management systems, such as VMware vCenter. This way an administrator
gets a single pane of glass to manage both IT equipment and the supporting infrastructure. IPM provides
the shutdown, migration, disaster recovery and load shedding features in virtualized environments.
Intelligent Power Protector (IPP)
is a shutdown agent with basic monitoring and alarming capability. It
provides automatic, graceful shutdown of computers and virtual machines or servers powered by an
Eaton UPS during a power outage that lasts longer than your available battery runtime. Intelligent Power
Protector can be remotely supervised and managed by the Intelligent Power Manager (IPM) application.
Intelligent Power Software suite is delivered on a CD with the UPS. Alternatively, you can download it from
the Eaton web page. Some of the advanced features of IPM require a license, contact your Eaton
representative for details.
6
6..1
1..3
3
SSiiggnnaall iinnp
puutt m
moonniittoorriinngg
This standard feature lets you connect smoke detectors or over-temperature alarms to your signal inputs.
The user interface terminals for external connections are located inside the UPS. Use twisted-pair wires
for each alarm input and common.
EATON 93PM G2 UPS
USER’S AND INSTALLATION GUIDE
P-164000956 - February 2021
www.eaton.eu
6
63
3
