Eaton 5SC 1000i Rack2U, Инструкция по установке и эксплуатации

Страница: 20 / 20

Page 20
5SC 1 - 3 KVA US_EN
6. Appendices
Backup time Time during which the load can be supplied by the UPS operating on battery power.
Battery test Internal UPS test to check battery status.
Cold start The devices connected to the UPS can be started even if AC input power is not
available. The UPS operates on battery power alone.
Deep discharge
Battery discharge beyond the permissible limit, resulting in irreversible damage to the
battery.
Load
Devices or equipment connected to the UPS output.
Low-battery
warning
This is a battery-voltage level indicating that battery power is low and that the user
must take action in light of the imminent break in the supply of power to the load.
Normal AC
input
The AC-power line supplying the UPS under normal conditions.
Percent load Ratio of the power effectively drawn by the load to the maximum output of the UPS.
Personalisation It is possible to modify certain UPS parameters set in the factory. Certain UPS functions
can also be modified by the software to better suit user needs.
UPS Uninterruptible Power System.
UPS ON/OFF
controlled by
software This function enables or disables initiation of UPS ON/OFF control sequences by
computer power-management software.
6.2 Glossary