Eaton 5P 750 Скачать руководство пользователя страница 6

Page 6

620-00082-01-us (en)

1. Introduction

Thank you for selecting an EATON product to protect your electrical equipment. 

 

The 5P range has been designed with the utmost care.
We recommend that you take the time to read this manual to take full advantage of the many features  

of your UPS (Uninterruptible Power System). 

 

Before installing your 5P, please read the booklet presenting the safety instructions.  

Then follow the instructions in this manual. 

 

To discover the entire range of EATON products and the options available for the 5P range,  

we invite you to visit our web site at www.eaton.com/powerquality or contact your EATON representative.

1.1  Environmental protection

EATON has implemented an environmental-protection policy.
Products are developed according to an eco-design approach.

Substances

This product does not contain CFCs, HCFCs or asbestos.

Packing

To improve waste treatment and facilitate recycling, separate the various packing components.

• 

The cardboard we use comprises over 50% of recycled cardboard.

• 

Sacks and bags are made of polyethylene.

•  Packing materials are recyclable and bear the appropriate identification symbol 

01

PET

Materials

Abbreviations

Number in  
the symbols 

Polyethylene terephthalat

PET

01

High-density polyethylene

HDPE

02

Polyvinyl chloride

PVC

03

Low-density polyethylene

LDPE

04

Polypropylene

PP

05

Polystyrene

PS

06

Follow all local regulations for the disposal of packing materials.

End of life

EATON will process products at the end of their service life in compliance with local regulations.
EATON works with companies in charge of collecting and eliminating our products at the end of  

their service life.

Product

The product is made up of recyclable materials.
Dismantling and destruction must take place in compliance with all local regulations concerning waste.
At the end of its service life, the product must be transported to a processing center for electrical and  

electronic waste.

Battery

The product contains lead-acid batteries that must be processed according to applicable local regulations 

concerning batteries. 
The battery may be removed to comply with regulations and in view of correct disposal.

01

PET

Содержание 5P 750





























Отзывы: