![background image](http://html1.mh-extra.com/html/eaton/5775x-42x/5775x-42x_manual_3771951023.webp)
23
1234
1234
1234
1234
1234
1234
12345
12345
12345
12345
12345
12345
12345
To change a value,
1. Press the
Edit
key:
Edit
Durant
the most significant digit of the value will flash.
2. Use the
or
key to change the value of the flashing digit:
Durant
3. Press the
View
Enter
key to enter the new value and display 2.
View
Enter
Durant
Entering the Program Mode
Note: It is recommended that upon installation, one of the control inputs be pro-
grammed to one of the Lock Functions, and then activated via a jumper to ground to
prevent inadvertent operator entry into the program mode. If the program mode must
be accessed after installation, remove the jumper wire and follow the procedure
below.
Caution: Entry into the program mode will cause both relays, if installed, to
turn OFF, and will cause the analog output, if installed, to go to its minimum
values (4 mA and 0V).
PROGRAMMING cont.
Indicates flashing portion of
display.
!
Indicates flashing portion of
display.
Flashing stops.