58
Position 14 and 15 Press Override (POR) Setting Ports A & B
NOTE: You must choose pressure override
settings for both ports A and B. The pressure
override setting should be 35 bar less than the
high pressure relief valve.
0 .................. None
A .................. Pressure Transducer (No pressure override valve)
B .................. 205 bar [3000 lbf/in
2
]
C .................. 240 bar [3500 lbf/in
2
]
D .................. 275 bar [4000 lbf/in
2
]
E .................. 310 bar [4500 lbf/in
2
]
F .................. 345 bar [5000 lbf/in
2
]
G .................. 380 bar [5500 lbf/in
2
]
M ................. 395 bar [5725 lbf/in
2
]
H .................. 415 bar [6000 lbf/in
2
]
Position 16,17 Special Pump Features
00 ................ No Special Features
01 ................ Plugged Magnetic Speed Sensor Port
02 ................ Magnetic Speed Sensor
03 ................ Adjustable Servo Stop (one direction)
Position 18,19 Control
EB ................ CAN Multiplex Electronic Control
EE ................ Electronic Proportional Control 12 Vdc and
Electronic Driver with 1 to 5 Vdc Potentiometric
Command Input
EF ................ Electronic Proportional Control 24 Vdc and
Electronic Driver with 1 to 5 Vdc Potentiometric
Command Input
EG ................ Electronic Proportional Control 12 Vdc and
Electronic Driver with 4 to 20 mA Command Input
EH ................ Electronic Proportional Control 24 Vdc and
Electronic Driver with 4 to 20 mA Command Input
EJ ................ Electronic Proportional Control 12 Vdc and
Electronic Driver with +/- 5 Vdc Differential
Command Input
EK ................ Electronic Proportional Control 24 Vdc and
Electronic Driver with +/- 5 Vdc Differential
Command Input
Model Code
– Series 2 Variable Displacement Pump
The following 31-digit coding system has been developed to identify all of the configuration options for the
Series 2 hydrostatic pump. Use this model code to specify a pump with the desired features. All 31-digits of
the code must be present when ordering. You may want to photocopy the matrix below to ensure that each
number is entered in the correct box.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
A
C
L
0
A
Model Code—Heavy Duty Series 2 Pump
Position 1, 2, 3 Product Series
ACL .............. Hydrostatic-Heavy Duty Variable Pump
(Series II)
Position 4, 5, 6 Displacement
054 .............. 54 cm
3
/r [3.3 in
3
/r]
064 .............. 64 cm
3
/r [3.9 in
3
/r]
075 .............. 75 cm
3
/r [4.6 in
3
/r]
089 .............. 89 cm
3
/r [5.4 in
3
/r]
105 .............. 105 cm
3
/r [6.4 in
3
/r]
Position 7, 8 Input Shaft †
14 ................ 14 Tooth 12/24 Pitch Spline
21 ................ 21 Tooth 16/32 Pitch Spline
23 ................ 23 Tooth 16/32 Pitch Spline
† Ask your Eaton representative for additional shaft options
Position 9 Input Rotation
L .................. Counterclockwise (Lefthand)
R .................. Clockwise (Righthand)
Position 10 Valve Plate
0 .................. V-groove
1 .................. Propel
Position 11 Main Ports (Includes Gage Ports)
A .................. 25,4 [1.00] - Code 61 Per SAE J518
B .................. 25,4 [1.00] - Code 62 Per SAE J518
C .................. 25,4 [1.00] - Code 61 with M10 X 1 Threaded
Holes
D .................. 25,4 [1.00] - Code 62 with M12 X 1.75 Threaded
Holes
NOTE: You must choose relief valve settings for
both ports A & B
0
None
B .................. 205 bar [3000 lbf/in
2
]
C .................. 240 bar [3500 lbf/in
2
]
D .................. 275 bar [4000 lbf/in
2
]
E .................. 310 bar [4500 lbf/in
2
]
F .................. 345 bar [5000 lbf/in
2
]
G .................. 380 bar [5500 lbf/in
2
]
H .................. 415 bar [6000 lbf/in
2
]
L .................. 430 bar [6250 lbf/in
2
]