EAT E-Flat, Инструкция по эксплуатации

Страница: 11 / 18

11
d) Tonearm output connection
Connect the tonearm cable provided with the accessories to the RCA connectors that is located
at the rear of the turntable, behind the tonearm.
e) Vertical Tracking Angle setting (VTA)
To set the Vertical Tracking Angle, first put a record on the platter. When the needle is lowered
into the record groove, the flat tonearm should be parallel to the surface of the record. If it is
not, loosen a hexagonal screws in the tonearm base just enough to allow vertical movement of
the arm pillar without force, and slide the arm up or down until it is parallel.
Carefully and evenly retighten the hexagon screw without applying excessive force (which could
deform the arm pillar)