Note
: If a user is not selected, the scale will turn off after about 40 seconds.
g) After finishing user selection, the body composition results will be shown and cycle
three times before turning off.
Note
: For automatic user identification to work you must first select a profile, input
your profile data and measure your weight at least once.
If a user profile isn’t
automatically located, please re-do steps 1 and 2 carefully or call for support.
4. How to Delete a User Profile
In the event that two profiles conflict (- 6 lbs of each other) it is possible to delete
one of the profiles by doing the following.
a) Step on the scale. Your weight will appear.
b) The scale will try to pull up a user profile. If there are two or more conflicting
profiles the screen will display something similar to P1P2 (or P2P3).
c) Touch and hold the “SET” button for 3 seconds and the display will show “DEL”.
d) Press the
button to select P1 or press the
button to select P2. The display
will then show the following for 5 seconds and then shut off.
Next time the scale is turned on, all information pertaining to the deleted user will be
cleared.
or
