7
6
TO CLEAR MEMORY
Press and hold the unit button located on the
bottom of the scale for 10 seconds to clear
memory to 0lb. The display will show ‘
clr
’ for 3
seconds and the scale will automatically shut off.
WARNING MESSAGES
Lo
=
Low Battery Warning.
Replace the 3 AAA batteries.
Err0
=
Zero Position Change.
Indicates the current weight result
may be not accurate. Restart the scale again by pressing lightly on
the platform and allow it to turn off automatically. The scale will
reinitialize and is ready for use.
Err1
=
Weight cannot be locked.
Be sure to stand completely still while
the scale is reading the weight.
Err2
=
Overload Warning.
The maximum weighing capacity of the scale
has been exceeded.
Remove the weight immediately otherwise
permanent damage to the scale may occur
.
C
=
Initialization Error.
The scale needs to recalibrate. Step off the
platform and allow the display to turn off. Then step on the scale
again and remain still while the scale computes. Your weight cannot
be locked-in if you do not stand still.
TROUBLESHOOTING
In Case of Difficulty...
1. Place your feet in the same position every time you weigh yourself.
Stand still during measurement.
2. Weigh yourself without clothing whenever possible. Clothes can vary in
weight.
3. Move the scale to a location where it won't be bumped. If your scale is
bumped while being activated or while in use, an inaccurate reading
may occur.
4. For the most consistent readings, weigh yourself at the same time of
day. Allow for weight fluctuations due to food or drink in your system.
5. The maximum capacity of this scale is 440 lbs / 200 kgs. Should “
Err2
”
appear on the display during a weighing, this indicates that the
maximum weighing capacity of the scale has been exceeded.
Remove
the weight immediately otherwise permanent damage may occur
.
6. Clean exposed parts with a soft, slightly damp cloth. To remove stains,
use a mild soap. Never use detergents, excess water, treated cloths,
harsh cleaning agents, or sprays. Do not attempt to lubricate or open
scale casing as this will void your warranty.
7. Although your scale is designed to be maintenance-free, it contains
sensitive electronic parts. Avoid rough treatment. Do not drop, kick, or
jump on it. Treat it with care to ensure the best performance.
8. This scale is designed to read weights between 10 and 440 lbs / 5 and
200 kgs. To prevent damage, do not place more than 440 lbs / 200 kgs
on it.
9. Do not store scale where you store cleaning chemicals. The vapors from
some household products may affect the electronic components of your
scale. Do not store scale on its side.
10. This scale is an extremely sensitive weighing device. In order to
prevent run down of the battery, do not store anything on the scale.
11. Do not dispose of batteries in fire. Batteries may explode or leak.
Always replace all batteries at the same time; do not mix old and
new batteries. Do not mix Alkaline, carbon-zinc (standard) or Nickel-
Cadmium (rechargeable) batteries. Remove the batteries if the scale will
not be used for a long period of time.
