distance, (check the distance is right or not .that is, when drawing A4 sheet, the nozzle should be
attached to the A4 sheet without scratching it).
c), do the same way to adjust another
3 points
。
○
2
○
3
○
4
d), When the distance between the nozzle and the platform all is right distance in
four
○
1
○
2
○
3
○
4
points, leveling finished and succeed.
(2),Install 3D filament, Feed.before print need load filament inside the nozzle,
a),Insert filament into the print head guiding tube until it can not go further,
and gently press the
filament to keep it.
b)Then use another hand to operate the screen , choose
“prepare”
and confirm, and choose
“in/out filament”
and confirm . then choose
”in filament”
and confirm, The printer head has a
heating process when feeding. Please wait patiently for a while. wait till there will be 10cm silk
filament come out from the nozzle. Filament feed successfully. Choose
”Stop in/out filament
” to
