easyteck G101, Быстрый старт

Страница: 2 / 6

2
telephone will dial the first number followed by a pause then continue
with the rest of the number.
AUTO-IP
LCD display
SET 4 IP
, press
SET
key to enter this mode. LCD display
AUTO IP OFF and OFF will flashes, use UP key to select value. When
LCD displays AUTO IP ON , press SET key. Then the LCD will display
INPUT CODE for you to enter the IP numbers. Use DEL key to correct
any wrong input. After entered all IP number, press SET key to confirm.
After you have set a number on Auto IP, e.g. 1455. If you need to call
any number that starts with 14550, just type 0 to represent 1455 then
follow by the subsequent numbers. To illustrate:
1. Press 0 288888 follow by
REDIAL button
2. The telephone will call out 1455 0 288888.
4. FUNCTION KEY OPERATION
UP key
In any mode, press UP key to check all the incoming numbers. If there is no incoming number,
the unit will display END .
RD key
In the off-hook mode, press this key to redial the last dialed number. In on-hook mode,
pre-dial the numbers and press this key to dial out using hands free speakerphone.
When the line busy,press this key,the unit will auto dial the number till success.
FLASH / BRT key
In the on-hook mode, press
FLASH/BRT
key, the phone LCD will display
LCD 1-5
, which
means there are 5 contrast levels. In the off-hook mode, press this key to auto-hang up, after
that you can press
REDIAL
key or dial out another number.
5. ADDITIONAL NOTES
INCOMING CALL LCD INDICATOR
When there is incoming call, the unit will be automatically display the caller number, date and
time, and also display its serial number. If the incoming call is in private mode, it will display
“__p__”; it will display “__0__” if exchange cannot determine the number; it will display
“—E—“ if the call signal contains error.
TROUBLESHOOTING GUIDE
(Q) I do not hear any dial tone from the handset.
(A) Ensure the handset cord is connected correctly from the handset to the handset cord jack
at the base. Ensure you have plug in the telephone cable from the telephone to the wall
socket correctly. If the problem persists, please check with your local dealer.
(Q) I could not see the caller’s number on the LCD when there is incoming call.
(A) Ensure that you have subscribed Caller ID service from your local telecom provider.