Easystreet AIR LIFT 75695, Руководство по установке

Страница: 6 / 12

4 MN-662
EasyStreet
PREPARING THE VEHICLE
1. Elevate the vehicle and support the body with a hoist or jack stands.
2. Remove rear tire.
REMOVING THE REAR SHOCK
Driver’s side shown.
1. Remove (2) two upper retaining bolts from the shock’s upper mount. Save for later
reinstallation (fi g. 2).
2. Remove lower shock bolt, nut, and washer. Save for later reinstallation (fi g. 2).
3. Remove shock. Save for later reinstallation.
Installing the EasyStreet Kit
REMOVING THE COIL SPRING
1. Insert and tighten an internal coil spring compressor.
2. Remove lower control arm bolt
MAKE SURE TENSION IS OFF OF THE COIL SPRING.
3. Using the internal coil spring compression tool, compress coil spring and remove (fi g. 3).
4. Remove upper spring retainer bushing and discard (fi g. 3).
5. Reattach lower control arm bolt.
Shock
Upper Retaining Bolts
Lower Shock
Bolt and Nut
fi g. 2
Coil Spring
Lower Control Arm Bolt
Upper Spring
Retainer Bushing
fi g. 3
WARNING
NOTE