EasyStand Bantam Extra Small Скачать руководство пользователя

Страница: 18 / 31

Seat Depth/Back Angle/Back Height

Caution:

Do not adjust the seat depth while the child is in the

unit

Caution:

Ensure the colors on the seat tube and following arm

match.

First remove the Shadow Tray and bring the seat up to a slight

angle.

FIG. H-

Loosen the knobs on the seat tube and the following arm.

Do not unscrew knobs out all the way when adjusting the seat.
The Bantam

Extra Small

back angle adjustments are located

above the locking knob. The back angle adjustments go from

green (largest) to blue (smallest).
The Bantam

Small

back angle adjustments are located below

the locking knob. The back angle adjustments go from blue

(smallest) to green (largest).

FIG. I-Adjusting to a shorter setting:

Adjust the following arm

(back angle) first by depressing the spring button and moving

no more than two holes at a time. Then adjust the seat tube

(seat depth) one hole at a time. Continue this sequence until you

achieve the desired setting and the colors on the seat tube and

following arm match.

FIG. I-Adjusting to a longer setting:

Adjust the seat tube (seat

depth) first by depressing the spring button and moving only one

hole at a time. Then adjust the following arm (back angle) no

more than two holes at a time. Continue this sequence until you

achieve the desired setting and the colors on the seat tube and

following arm match.

FIG. J-

For easier adjustment, use the back bracket as a handle.

You may need to lift slightly as the seat depth adjustment is

made.

FIG. H-

Tighten the seat depth and following arm knobs securely

when you have achieved the desired position.

FIG. K-

To adjust back height, loosen knob and slide back into

position. Tighten securely.

Shadow Tray Option

Caution:

These adjustments are only to be made while the unit

is in the seated position.

Caution:

Always support the tray when loosening the ratchet

handles to adjust the tray.

Caution:

After placing the tray into position, ensure the ratchet

handles on the side of the tray are tightened securely.

FIG. L-

To adjust the depth of the optional tray, place tray tubes

into the receptacles and line up holes to the desired depth,

and insert pins.

FIG. M-

To adjust the height of the tray, loosen both ratchet

handles and lift the tray to the user’s desired height, tighten

securely.

FIG. N-

To adjust the angle of the tray, loosen both ratchet

handles on the side of the tray and position the tray to the user’s

desired angle, tighten securely.

FIG. H

FIG. I

FIG. J

FIG. L

FIG. K

FIG. M

FIG. N

Following Arm

Seat Tube

Extra Small

Small

Adjustments & Usage

Page 15

Содержание Bantam Extra Small
































Результаты поиска

Содержание Bantam Extra Small

Отзывы:

Похожие инструкции для Bantam Extra Small

Бренды по названию

Популярные бренды

EasyStand Bantam Extra Small, Руководство пользователя

Результаты поиска

Содержание Bantam Extra Small

Отзывы:

Похожие инструкции для Bantam Extra Small

Бренды по названию

Популярные бренды