background image

Programmable Timer Features

•   Digital electronic time switch with daily programs

•   Repeat programs with 16 on/off settings and manual override

•   Lithium battery power reserve to keep time and programs even in power outage.

•  Auto time error corr/- 60 sec. weekly

Operation Instructions for Automatic Program Function

1.  Plug controller into 110 volt GFCI protected outlet. Red light on timer will come on to indicate 

power is being supplied to lights. After timer settings are made, the red light only comes on 

during operation of programmed Auto “On” setting or when ON in Manual mode (see Manual 

Mode section).

2. Remove clear plastic cover from timer. Be sure not to lose this cover.
3.  Unlock the timer by pressing the “C/R” button four times. This removes the “a” character in 

lower left corner of the display screen. If no keys are selected in 15 seconds, the time will 

automatically lock. Or once programming is finished press “C/R” button to lock.

4.  To clear all programs, press the Reset button (labeled as 'c'). It is inset and will require a pen 

or small object to depress.

5.  Once unlocked, set the time by pressing the button with the clock icon, then use D+ to set 

the day of the week, H+ to set the hour (uses military time only) and M+ to set the minute. 

6. Up to 16 on/off settings can be programmed using the chart below.

 

Note:  Set times in sequence as you may not cross set. System will auto lock 

with no activity or data saved within 15 seconds.

Setting the Timer

Mount the weatherproof controller box in a secure location near a power supply 

and plug into 110 volt outlet. The controller is weatherproof and does not need 

to be protected from the weather.

PROGRAM

  Step 

Key 

Programming

  1 

Setting 1 ON time (display 1 on)

  2 

H+/M+ 

Setting hours and minutes to turn on

  3 

D+ 

Daily selects same time or separate times

  4 

Setting 1 OFF time (display 1 off)

  5 

H+/M+ 

Setting hours and minutes to turn off

  6 

D+ 

If using the same time everyday, do not press

  7 

Repeat 2-6  Set 2-16 ON/OFF time

  8 

  

End

If you do not require 16 settings, press clock icon to the end

ON

OFF

AUTO

Example

Program Functions

Example

Manual Functions

Содержание WFC2

Страница 1: ...ied technician Always follow the National Electrical Code NEC or the Canadian Electrical Code as well as all local state and provincial codes Failure to follow manufacturer s installation instructions may result in electrical shock fire hazard personal injury or death damaged equipment provide unsatisfactory performance and will void manufacturer s warranty WFC2 WFC34 WFC56 Controller Features and...

Страница 2: ...ar all programs press the Reset button labeled as c It is inset and will require a pen or small object to depress 5 Once unlocked set the time by pressing the button with the clock icon then use D to set the day of the week H to set the hour uses military time only and M to set the minute 6 Up to 16 on off settings can be programmed using the chart below Note Set times in sequence as you may not c...

Страница 3: ...ed outlet 2 Remove clear plastic cover from timer Keep cover safe and replace when finished 3 Unlock the timer by pressing the C R button four times This removes the a character in lower left corner of the display screen 4 Press Manual button to select desired function The ON function will tell controller to send power to lights and OFF function will stop power from being supplied to lights 5 When...

Страница 4: ...rts covered under this warranty Making a Claim A Return Authorization RA number must first be obtained by calling EasyPro at 800 448 3873 or via email at warranty easypro com It is the purchaser s responsibility to pay the return shipping charges Be sure to include the RA number original receipt in the form of an invoice or sales receipt your name your return address and your phone number inside o...

Отзывы: