EasyPro Pond Monsta, Руководство пользователя

Страница: 11 / 16

11
How to use your
POND MONSTA
E nsure that the remote control handle battery is installed (see diagram below).
Note - Remove large objects over 32mm (1 1 /
4
") in size with a net to prevent exces-
sive blocking of Pond Monsta during operation. It is normal for Pond Monsta to
block and require clearing occasionally. Pond Monsta has been designed so that
this requires a minimum of time and effort (see “clearing blockages” on page 12).
1. Plug in GFI (not supplied).
2. Plug in fitted three prong RF receiver plug.
3. Plug in RF receiver connector plug.
4. Connect hose to outlet hose tail firmly, a hose clip may be used to secure (not
supplied).
5. Choose Collector recycling option/position for Collector outlet returns (see
page 12).
6. Place hose in Collector locator.
7. Connect hose and cable to hose cable clips. Adjust so that the hose is level
with the water surface when the Monsta is fully submerged.
8. Adjust pole by twisting and locking to a comfortable height.
9. Switch on main electrical supply, standby light will show red on the RF re-
ceiver.
10. Submerge Pond Monsta fully until air stops releasing from air outlet (the Mon-
sta will not pump effectively until all air is released).
11. Compress safety button and squeeze lever to activate pumping on, release to
turn off.
12. Waste will now start to flow into the Collector, it is recommended that the
higher shelf areas are cleaned first. Always move the Pond Monsta in a slow
back and forth motion to prevent disturbing the sediment and waste.
13. Secondly, clean the base of the pond, again use a slow back and forth mo-
tion using the clear hose as a visual guide to indicate which areas have been
cleared.
14. When the Collector basket is full or over flowing, turn off the Pond Monsta by
releasing the handle and remove the collected debris to waste or compost.
R R E E L L E E A A S S E E O O F F F F
ON