8
Windmill Aeration System ...
The windmill pond aerator is an excellent alternative to
electric pond aerators. The windmill has a complete set of
instructions included with it. Please follow these instruc-
tions to assemble the windmill head and tower. We supply
the air hose and air diffuser for this windmill kit.
Note: A check valve is included with the windmill to go in
the airline underwater by the air diffuser. Our air diffuser
includes a built-in check valve so you will not need the one
included with the windmill.
When you get to page 5 in the instruction book, please fol-
low these instructions for the diffuser installation:
Fill base of air diffuser with sand or gravel. Screw mem-
brane diffuser into top of base. Attach end of tubing to
outlet and clamp. Unroll the tubing completely before
attempting to install the diffuser assembly in your pond.
Tubing needs to be
weighted to sink.
Usually a three to
five pound weight every six to eight feet is adequate.
Weights can be landscape bricks, rerod, etc., and
should be strapped tightly to the tubing with electric
ties. Omit this step if you are using self-weighted tub-
ing.
A 20' piece of black plastic hose is included with your
windmill. This tubing connects to the outlet on the
compressor at the top of the windmill and runs down
the tower to the ground. A connector is included to
connect to the 100' roll of tubing at this point.
After installing the manifold in the pond, connect the
other end of the vinyl tubing to the end of the black
tube coming off the windmill.
Windmill Packing List:
Description.
Qty.
Packed
Windmill Package (# of boxes varies)
1
Membrane Diffuser
1
Tubing Clamp
1
3/8" Vinyl Tubing, 100' roll
1
12" x 21" White Underlay
1
Packed By:
Date:
# of Boxes:
