background image

Reliability You Can Count On!

EXT Series

© 2019 EasyPro, Inc

Pg. 1

 IN THE USA

ASSEMBLED

WARNING: Please read completely before you install or operate your new pump! Do NOT allow this pump to become 

submerged! Never run dry - Never reverse rotation. Never exceed an internal case pressure of: 100 PSI. 

Please fill in for future reference: 
MODEL: ______________________________________
SERIAL NUMBER: _____________________________
DATE PURCHASED: ___________________________

* Please fill out the warranty registration card in this manual

Installation and Service Manual

for EXT75, EXT180, EXT300, EXT1500

EasyPro

XXXXXXXXX

S/N: XXXX-XXXXXX

 

TYPE:  END-SUCTION CENTRIFUGAL

 

MOTOR:  NEMA 143JM-215JM

 

PORT SIZE:  3" FLANGED INLET, 2" FLANGED DISCHARGE

 HORSEPOWER:  3/4 HP  THROUGH 15 HP

  HARDWARE:  STAINLESS STEEL 

 SEAL OPTIONS:  STAINLESS STEEL WITH BUNA AND VITON

Содержание EXT Series

Страница 1: ...ure reference MODEL _______________________________________ SERIAL NUMBER ______________________________ DATE PURCHASED ____________________________ Please fill out the warranty registration card in this manual Installation and Service Manual for EXT75 EXT180 EXT300 EXT1500 EasyPro XXXXXXXXX S N XXXX XXXXXX TYPE END SUCTION CENTRIFUGAL MOTOR NEMA 143JM 215JM PORT SIZE 3 FLANGED INLET 2 FLANGED DIS...

Страница 2: ... installed the EXT Series Pumps will provide dependable trouble free service 1 Locate the pump as near the fluid source as possible A flooded suction situation is preferred 2 Mount motor base to a secure immobile foundation 3 The pipe fittings should be self supported and in neutral alignment with each port i e Fittings must not be forced into alignment which may cause premature line failure or da...

Страница 3: ...ing surfaces with lint free tissue and alcohol Do not use silicone lubricants or grease 10 Slide impeller on motor shaft aligned with key 11 Assemble special impeller washer over threaded rod Secure with 3 8 16 stainless steel hex jam nut using 9 16 long reach socket hold impeller while tightening 12 Lightly grease cap O ring with silicone grease assemble cap with O ring over threaded rod and tigh...

Страница 4: ...th pump materials of construction This warranty only covers properly installed and maintained Products sold by authorized EasyPro Sellers who are subject to and follow EasyPro s quality control standards Please note that because EasyPro is unable to control the quality of Products sold by unauthorized sellers unless otherwise prohibited by law this warranty does not cover Products purchased from u...

Отзывы: