Figure 5
Figure 4
Figure 3
Figure 2
Lamp Replacement
1. Make sure the unit is
disconnected from the
power source.
2. For the ECF10 (U)
proceed to step three,
then proceed to step
five and continue. For
the ECF25 (U) and
ECF40 (U) proceed to
step four, then pro-
ceed.
3. Loosen the screws on the top retaining ring. Do not
remove the screws - do not remove the retaining
ring. Twist the UV
housing and match
the arrow on the UV
cover with the arrow
on the retaining ring.
Gently pull up on the
cord and cover in the
back to loosen the UV
cover. (see figure 1
and 9)
4. Loosen and remove
the three screws on
top of the UV cover.
(see figure 2)
5. Remove the UV cover and set aside. (see figures 3 &
4)
6. Remove the two screws and the plastic retainer clip
that hold the cord in place and set aside. (see figure 5)
7. Unscrew the UV light and carefully remove from the
housing. (see figure 6)
Figure 6
3
Figure 1
