CAMERA FOR PETS
Manual instruction
Function:
: VIDEO
: CAMERA
: 1MIN. TIMER
: 3MIN. TIMER
: 5MIN. TIMER
: 10MIN. TIMER
: 15MIN. TIMER
Operation:
1.
Power:
Press Power button and hold for few seconds to turn
on the camera.
2. When the camera is set on
or
mode, if there is
no any operation in 2 minutes, it will be off automatically .
3.
LED indicator
:
* If showing green light, it means Power on
* If the green light flashes once, it means the picture is taken.
* If the green light keeps flashing, it means the recording is
on.
* If showing blue light, it means standby or in sleeping mode
condition (picture-‐taking interval timer)
* If the blue light flashes a lot without any function setting, it
means the memory card is full or without inserting any
card.
* If the blue light flashes very fast, it means low battery
power, and will turn off automatically soon.
* If showing red light, it means the camera is charging. When
the power is full, the red light will be off.
4.
Video
: When the camera is on, press Mode button once, it will
show
on the digit display. Then press Shutter button to
start recording. At the same time, the LED green light will keep
flashing. And, press Shutter button again to stop the recording.
The LED green light will stop flashing.
5.
Camera
: Press Mode button twice, and it will show
on
the digit display. Then press Shutter button to take a picture,
the LED green light will flash once to finish the shoot.
6.
Time lapse
: Press Mode button three times to set the picture
interval timer. There are five options of timers -‐
/
/
/
/
. After selecting one timer, press
Shutter button to confirm, and the LED indicator will turn to
blue color. If the picture is taken, the LED indicator will flash
green, and turn back to blue color again after the
picture-‐taken is finished.
* When setting the timer, it will go into sleeping mode in order
to save battery power.
Back clip installation:
1. Follow the below illustration A to install the back clip.
(There is
a “click” sound if the clip is fixed firmly, and then adds the
screw to fix the clip again)
2. Follow the below illustration B to install pet’s neck belt.
(A)
(B)
Notice: To prevent any accidental damage or loss, the pet’s use
under an adult’s supervision is recommended.
Memory card installation:
1. Follow the below illustration C to open USB cover by using the
screwdriver.
2. Follow the below illustration D to insert Micro SD card.
(C)
(D)
3. Then follow the below illustration E to fix the cover
(E)
Notice: Kids are not allowed to use the screw driver because of
safety reason. The cover must be opened and closed by an
adult.
USB transmission and charging:
1.
By connecting the camera to the PC with USB cable, and to
download the files from removable DISK.
2.
Charging or recharging by connecting to the PC with USB cable.
(When charging, the LED indicator will light red, and wait till
fully charged, the red light will be off) The fully charging time
is around 4 hours.
Safety notice:
1. Please have the battery fully charged when using the camera
first time.
2. This model is with 3 meters waterproof design and 1 meter
shock-‐proof. Please use and maintain it with care.
3. If the camera doesn’t work, please don’t try to repair or
disassemble it. Be sure to send back the camera to the seller
for repair immediately.
4. Please don’t put the camera in the high-‐temperature place.
5. After using it underwater, please clean the camera with fresh
water first, and then wipe off all moisture with clean cloth
before opening USB cover. Otherwise, if the camera is not dry
completely, the water will get inside the camera body, and
damage the internal electronic parts.
6. There is a waterproof O-‐RING installed around USB port.
Please don’t take it out, and if there is any dirt on the O-‐RING,
please clean it carefully in order to keep good waterproof
performance.
7. If the camera is out of function suddenly, please refer to the
below steps to reset this camera.
1) Open USB cover by screwdriver
2) Use the sharp tool to insert to “R” hole next to USB port.
Notice: After reset, if the
camera still does not work
normally, please send back
to the seller for checking.
Attach the camera to the collar:
To attach the camera to your pet's collar please slide
the collar through the clip and make sure that the camera is
securely in place.
The collar should always be fitted in a comfortable way.
After that please check the angle of the camera arm
-‐ the lens should be perpendicular to the ground.
Warning: The camera is not a toy.
Please do not leave your pet unattended.
Easypix is not liable for any incidents in connection with the
device.
Specifications:
Image Sensor
0.3 mega pixels CMOS sensor
Video resolution
VGA
Lens
Fixed focus; F=2.6 / f=4.8mm
Display
88 Digit display
Memory
External: 4GB Micro SD card
Support Micro SD card up to 16GB
Interval time
(picture-‐taking): 1/3/5/10/ 15min.
File format
JPEG/AVI
Power source
Built in lithium 550mAh rechargeable
battery
Interface
USB 1.1
Dimension
65x55x33.5mm (camera only)
Weight
63g (camera only)
Accessories
USB cable, user’s manual, hand strap,
back clip, screw driver, 2 collars, 4GB
Micro SD Card with adapter
For EU only
