We never stop trying!
5
Reset line
：
short circuit two lines with power off,then power on for 10 seconds to
return back default setting.
RJ-45 ethernet interface
：
connect ip camera to LAN
Backup
：
follow-up product extend interface.
About GPIO alarm interface (S terminal)definition:
1# +DC12V
2# RS485
（
A
）
3#
地（
GND
）
4# IO2
（
OUT PUT
）
5# RS485
（
B
）
6# IO1
（
IN PUT
）
GND:
Signal ground, Alarm ground, RS485
ground
RS485: RS485 control interface
，
The left one is
connected to negative pole of RS485 and the right
one is connected to the positive pole of RS485. It
can be connected to Pan/Tilt or encoder and can support multiple protocols
Warning
：
：
：
：
Please use the attached power adapter to avoid damaging
the IP camera.