4
Safety Instructions
• Please ensure that the voltages of the power supply you are using match with
rated working voltages before operating the machine
• The power supply should be close to the system for convenient use
• The power supply should provide reliable protective earthing connection
• Before the operation, the electric outlet must be grounded correctly
• This system must be earthed reliably to ensure the safety of the system during
operation
• Only the operators of this system should operate the electric or motion
components/controls
• Please don’t use damaged wires or sockets
• Please keep children away from touching and operating this system
• Please do not spray water or other liquid on the system otherwise electric shock
or system faults could occur
• Please do not replace power cord or plugs yourself, do not put heavy objects on
the power lines as this may cause electric shocks
• During use please take care that no clothes, neckties, hair, necklaces etc are near
the system otherwise injuries could occur
• Please don’t put burrs, sharp blades or over thick rigid materials between the
roller (for example, tools, rulers and knives etc.)
• Don’t cut adhesive films directly on the surface of the roller to avoid damage
• Please shut down the system after laminating to avoid misuse
• At the end of the working day always gape the rollers to ensure no flat spots or
distortions occur
• When you need to move the system, please shut down the power switch and pull
out the plugs
• Always ensure the system is positioned on a flat and sturdy surface
• Please shut off the power supply (pull out the power plug) when the system isn’t
going to be used for long periods of time
• Don’t disjoint, modify and repair the system yourself
• Do not operate the system with wet hands
• Do not have the system pressing on the electrical wire
• Ambient temperature 10°C - 40°C, humidity 30% - 80%, ideal humidity 55%
• Dust - Due to the static adherence of the film, you should keep the environment clean
• Please do not keep the system in direct sunlight
• Please do not keep the system in or around dusty areas
• Enough space should be kept around the system to ensure the secure and effective application
Environmental Requirements
