EN
Instructions
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
✆
+49 38851 314650 *)
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
All rights reserved.
Dear Customer,
We are delighted that you have decided on purchasing our
solar
lights.
If you have any questions, please contact the customer
service department via our website:
www.dspro.de/kontakt
Explanation of Symbols and Signal Words
Safety instructions: Read these carefully and follow
them to prevent personal injury.
Circuit symbol for direct current
Read instructions before use!
WARNING
warns of
possible
serious injuries and danger to life
CAUTION
warns of slight to moderate injuries
Important Instructions
CAUTION – Danger of Injury!
■
The articles are
not
a toy. Do not leave children and animals
unsupervised with the articles, in order to avoid injuries!
■
Danger of Burns from Battery Acid!
If a battery leaks, avoid
physical contact with the battery acid. Wear protective gloves
if necessary. If you touch battery acid, rinse the affected area
with abundant fresh water immediately and contact a doctor as
soon as possible.
■
The solar lights are designed to decorate outdoor areas. The
storage batteries charge during the daytime via the solar cell
fi
elds. The accumulated energy allows the LEDs to illuminate
at night.
■
The articles are designed for personal domestic use only and
are not intended for commercial applications.
■
The articles should only be used as described in these instruc-
tions. Any other use is deemed to be improper.
■
Protect the articles from naked
fl
ames and impact.
■
Never immerse the articles in water or other liquids. They are
only resistant to splashing.
■
During extreme weather conditions (e.g. storm, hail) or if the
articles will not be used for a long time, switch them off and
store them in a dry place.
■
Do not disassemble the articles (except for removing the stor-
age battery prior to disposal of the solar unit)! Have any repairs
done only by a specialist workshop or the customer service
department. The LEDs cannot be replaced.
■
Storage batteries may not be disassembled, disposed of in
fi
re, immersed in liquids or short circuited.
■
Keep the solar
fi
elds clean so that the greatest possible ab-
sorption of light is ensured. Wipe down the solar
fi
elds (and if
necessary also the remaining components of the article) with a
damp cloth.
Do not use any corrosive or abrasive cleaning
agents to clean the article!
They could damage the surfaces.
Items Supplied
WARNING – Danger of Suffocation!
Keep children
and animals away from the packaging material.
4 x solar lights
4 x ground spikes (consisting of two parts each)
4 x adhesive strip
1 x instructions
Check the items supplied for completeness and transport dam-
age. If you
fi
nd any damage, do not use the articles (!), but rather
contact the customer service department.
Remove any protective
fi
lm (e.g., from solar panel) and labels.
Ne-
ver remove the rating plate!
Overview
2
3
4
1
1
LEDs
2
Solar
fi
eld
3
Solar unit (including storage
battery) with On / Off switch
on the underside
4
Ground spike
Switching on and off
1. Slide the On / Off switches to the
ON
position to activate the
solar units.
The batteries can now charge up in daylight. When darkness sets
in, the LEDs automatically switch on. When it gets light, the LEDs
switch off and the batteries are charged up via the solar
fi
elds.
2. When the solar lights are not being used switch them off by
sliding the On / Off switches to the
OFF
position.
PLEASE NOTE:
Battery power can be severely impacted by ext-
remely low temperatures.
Set-up
The solar lamps should not be placed near to other light sources
such as street lamps or other lamps, so that the LEDs can be
switched on automatically.
Position the solar lights so that the solar
fi
elds are able to ab-
sorb direct sunlight the whole day preferably. They can either be
attached by means of the adhesive strips or anchored with the
ground spikes in the ground.
•
Before using the adhesive strips switch the solar units on
and clean the surfaces. To ensure that the adhesive strips ad-
here well, the surfaces must be clean, free of dust and grease.
• Mount the ground spikes as follows:
3. Insert the ground spikes into each other:
Slide one piece with a long slot (
A
) and a
piece with a short slot (
B
) into each other.
4. Mount the ground spike on the underside of
the solar unit.
5. Push the ground spikes into the ground.
Technical Data
Model number:
U-DL038
Article number:
07807
Power supply:
1.2 V DC (1x Ni-Mh storage battery, 500 mAh,
AA)
Type of protection
:
IP44
Charging time:
approx. 6 to 8 hours (in sunlight)
Lighting time:
up to 8 hours (with a fully charged storage bat-
tery)
ID Instructions:
Z 07807 M DS V1 1118
Disposal
The packaging material is recyclable. Dispose of the pack-
aging in an environmentally friendly manner and take it to a
recycling centre.
These articles are governed by the European Directive
2012/19/EU on waste electrical and electronic equipment
(WEEE). Do not dispose of these articles as normal domes-
tic waste, but rather in an environmentally friendly manner
via an of
fi
cially approved waste disposal company.
Batteries should be removed before the articles are dis-
posed of and should be disposed of separately from the
articles at suitable collection points.
Removing the storage battery
Loosen the screws of the solar unit and remove the cover. After-
wards, you can remove the storage battery.
A
B
Article number: 07807
