EN
Instructions for use
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
✆
+49 38851 314650 *)
*) Calls to German landlines are subject to your provider’s charges.
All rights reserved.
Dear Customer,
We are delighted that you have chosen this
set of 2
solar lamps.
If you have any questions, contact the customer service depart-
ment via our website:
www.dspro.de/kundenservice
Explanation of symbols and signal words
Danger sign: This symbol indicates risk of physical in-
jury. Read the associated safety instructions carefully,
and comply with them.
Circuit symbol for direct current
Read instructions for use prior to use!
Additional information
WARNING
warns of
possible
serious injuries and danger to
life
CAUTION
warns of mild to moderately severe injuries
Intended Use
• The solar lamp is designed to illuminate outdoor areas. The
storage battery charge during the daytime via the solar panel.
The accumulated energy allows the LEDs to illuminate at night.
• The product is designed for personal use only and is not in-
tended for commercial applications.
• The product should only be used as described in these instruc-
tions. Any other use is deemed to be improper. Store the in-
structions in a safe place.
SAFETY INSTRUCTIONS
■
WARNING – Danger of Suff ocation!
Keep children and ani-
mals away from the packaging material.
■
The product is
not
a toy. Do not leave children and animals
unsupervised with the product, in order to avoid injuries!
■
CAUTION – Danger of Burns from Battery Acid!
If the bat-
tery leaks, avoid physical contact with the battery acid. Wear
protective gloves if necessary. If you touch battery acid, rinse
the aff ected area with abundant fresh water immediately and
contact a doctor as soon as possible.
■
Never disassemble the solar unit (unless to remove the battery
before disposing of the solar unit). Have repairs carried out
by a specialist workshop or customer service only. The LEDs
cannot be replaced.
■
Batteries may not be disassembled, thrown into fi re, submer-
ged in liquids or shorted.
■
Never submerge the product in water or other liquids! It is only
splashproof.
■
Use suitable fastening material to mount the product on a wall.
If you are unsure whether the fastening material supplied with
the product is suitable, seek advice from a specialist stockist.
■
Before drilling, ensure that there are no pipes or cables behind
the intended drilling point.
■
In extreme weather conditions (e. g., storms, hail), or if you are
not using the product for a long time, switch off and store in a
dry place at room temperature.
■
Protect the product from naked fl ames and impact.
Items Supplied
• LED lamp with solar unit (2 x)
• Fastening material (4 x dowels, 4 x screws)
• Instructions for use (1 x)
Check the items supplied for completeness and possible transport
damage. If the product has been damaged in transit, do not use it
and instead contact customer service.
Remove any protective fi lm (e. g., from solar panel) and labels.
Never remove the rating plate!
Set-up
The solar lamp should not be placed near to other light sources
such as street lamps or other lamps, so that the LEDs can be swit-
ched on automatically.
Position the solar lamp so that the solar panel is able to absorb
direct sunlight the whole day preferably.
Please Note:
The solar lamp is splashproof (IP44). Nevertheless,
we recommend installing it in a location outdoors where it is pro-
tected from rain to ensure that it works perfectly.
Mounting
1. Place the solar lamp against the wall and mark out two drill
holes.
2. Drill holes into the wall and place dowels and screws in them.
3. Hang the solar lamp on the screws.
Switching on and off
1. The On / Off switch is located on the backside of the solar
lamp. Slide the On / Off switch to the
ON
position to activate
the solar lamp.
The storage battery can now charge up in daylight. When dark-
ness sets in, the LEDs automatically switch on. When it gets
light, the LEDs switch off and the storage battery is charged up
via the solar panel.
Before the LEDs can illuminate, the battery must be charged
up for approx. 6 to 8 hours.
2. When the solar lamp is not being used switch it off by sliding
the On / Off switch to the
OFF
position.
PLEASE NOTE:
Storage battery power can be severely impacted
by extremely low temperatures.
Cleaning
Keep the solar panel clean to ensure maximum possible light ab-
sorption. Wipe the solar panel (and other elements on the product
if necessary) with a damp cloth.
Never use corrosive or abrasive
cleaners to clean the product!
They can damage the surfaces.
Technical Data
Model number:
GD19071-02000
Article number:
08559
Power supply:
1.2 V DC (1 x battery, Ni-MH, 600 mAh,
AA type)
Battery charge time:
approx. 6 – 8 hours (in sunshine)
Lighting time:
up to 8 hours (when fully charged)
Type of protection:
IP44
ID instructions:
Z 08559 M DS V1 1019
Disposal
Dispose of the packaging material in an environmentally
friendly manner and recycle it.
Remove the battery before disposing of the product and re-
turn it to the appropriate collection facility separately from
the product.
This product is subject to European Directive 2012/19/EU
on Waste Electrical and Electronic Equipment (WEEE). Do
not dispose of this product as normal household waste, but
through an offi cially approved disposal company according
to environmental regulations.
Removing the Battery
Undo the screws on the bottom of the solar unit using a cross-
head screwdriver and remove the battery compartment cover. You
can then carefully remove and dispose of the battery.
