21
EN
Cleaning and Storage
PLEASE NOTE!
■
Do not use any caustic or abrasive cleaning agents to clean the device. They may
damage the surfaces.
■
Do not immerse in liquids!
• Wipe down the device with a soft damp cloth if necessary.
• Take the battery pack out of the power tool.
• Store the power tool out of the reach of children and animals in a dry, clean, frost-free
place that is protected from direct sunlight.
Troubleshooting
If the power tool does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps listed, contact the customer
service department.
Do not attempt to repair a power tool yourself!
Problem
Possible cause
Fix
The object is not
in
fl
ated.
Air is escaping at the connec-
tions between the air outlet
opening (
11
), compressed air
tube (
2
), adapter (
3
,
6
) or valve.
Check the connections and
twist them tight.
The battery pack (
5
) is too
weak.
Charge up the battery pack.
The compressor (
1
)
cannot be switched
on.
The battery pack (
5
) is not
inserted correctly in the power
tool.
It must engage audibly.
The battery pack (
5
) is empty.
Charge up the battery pack.
The compressor (
1
)
is hot or is making
unusual noises.
The compressor is overloaded.
Switch it o
ff
immediately and
allow it to cool down for at
least 30 minutes.
The battery pack (
5
)
is not charging up.
The control lamp of
the mains adapt-
er (
4
) does not light
up.
The mains adapter is not insert-
ed correctly in the plug socket
or the barrel connector is not in-
serted correctly in the charging
socket (
14
) of the battery pack.
Correct the connections.
The plug socket is defective.
Try another plug socket.
07703_Inlay_DE-EN-FR-NL_A5_V2.indb 21
07703_Inlay_DE-EN-FR-NL_A5_V2.indb 21
11.08.2020 14:55:17
11.08.2020 14:55:17
