EN
Instructions
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
✆
+49 38851 314650 *)
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
All rights reserved.
■
Use only the battery type speci
fi
ed in the “Technical Data”.
■
Take batteries out of the article when they are dead or if the
article is not going to be used for a prolonged period. This will
prevent any damage if a battery leaks.
■
Batteries must not be recharged or reactivated by other means,
dismantled, thrown into a
fi
re, immersed in
fl
uids, or short-cir-
cuited.
■
Protect the article from: impacts, heat, direct sunlight, sub-zero
temperatures, moisture and wet conditions.
■
Do not place any containers
fi
lled with liquid, for example vas-
es, directly next to the article.
■
The article should
not
be operated via a computer, because the
high charging current could damage the computer.
■
Make sure that the USB cable does not become squashed or
bent and does not come into contact with hot surfaces.
■
Do not make any changes to the article and do not attempt to
repair it. In the event of any damage, please contact our cus-
tomer service department. The individual LEDs cannot be re-
placed.
Items Supplied
• LED
Lantern
• USB cable (A connector to barrel connector)
• Instructions
Inserting / Changing Batteries
Insert three 1.5 V batteries, C, Baby type into the battery
compartment on the back side of the lantern before you
fi
rst use it. These are not supplied with the article.
Before inserting the batteries, check whether the contacts are
clean and clean them if necessary.
1. Open the battery compartment: Grip and press down the lock-
ing lug on the battery compartment cover. Lift up the cover at
the same time.
2. Insert three 1.5 V batteries of the C, Baby type into the battery
compartment. Ensure the correct polarity (+ / –).
3. Reattach the battery compartment cover and press it shut.
When you do this, make sure that the locking lugs sit in the
recesses which are provided for them. You must hear and feel
it engage.
Replace the batteries when the power of the lights starts to wane.
PLEASE NOTE!
Always replace all batteries together. Do not use
batteries of different types or brands, or batteries with different
capacities.
Putting Into Operation
1.
Unpack –
Check the items supplied for completeness (see
the “Items Supplied” section) and possible transport damage.
If you
fi
nd any damage to the components, do not use them (!),
but contact our customer service department.
2.
Set up –
Set the article up on a
fl
at, dry surface.
3.
Insert batteries / use USB cable –
Insert batteries into the
article (see the “Inserting / Changing the Battery” section).
If the article is to be operated with the USB cable, connect the
end with the barrel connector to the barrel connector input on
the article and connect the other end with the USB connector to
a power source, e.g. via a suitable mains adapter that supplies
at least 1 A (not supplied with the article) at a plug socket.
4.
Switch on / off –
To switch on the article, press the On / Off
switch on the back side of the article to position
I
.
To switch the article off again, press the On / Off switch to posi-
tion
0.
The article switches off automatically after 6 hours. It can
be switched on again at any time by pressing the On / Off
switch twice (position
0
→
position
I
).
Cleaning and Storage
NOTE!
■
Under no circumstances should you use any corrosive or abra-
sive cleaning agents, rough sponges or knives to clean the
article. These could damage the surfaces.
1. Disconnect the article from the USB cable or take the batter-
ies out of the article (see the “Inserting / Changing the Battery”
section).
2. Clean the article with a soft cloth and a little mild detergent if
necessary.
3. Thoroughly dry the article before it is stored away.
4. Store the article in a dry place that is protected from sunlight
and is not accessible to children and animals.
Technical Data
Voltage: 4.5
V
DC
(3 x 1.5 V batteries, C, Baby type)
Variations
Article number
Dimensions
Model number
04790
15 x 15 x 25 cm
B2578
04791
30 x 18 x 31.5 cm
B2575
Disposal
Dispose of the packaging material in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the article in an environmentally friendly manner
at a recycling centre for used electrical and electronic
devices. More information is available from your local
authorities.
Batteries should be removed prior to disposal of the article
and disposed of separately from the article at suitable col-
lection points.
Z 04790_04791 M DS V1 0318
Article number: 04790 / 04791
