PANTONE 072 C
PANTONE 123 C
everyday solutions
™
Est. 1992
Support Line: 0303 031 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
Instruction for indoor use
1. Remove all parts from packaging and check if all the parts are included and not damaged.
2. Connect the adaptor to the cable and make sure the metal wires align with the holes. Push it in
until firmly in place then screw the cable’s plastic sleeve onto the plug.
3. Attach light to the round base. Do not use excessive force or you risk damaging the light.
4. Ensure Star Shower Motion is placed on a steady, level surface.
5. Loosen the thumbscrew and adjust the angle of the Star Shower light housing so it is pointing at
your intended surface. Tighten the thumbscrew to hold angle.
Operation:
When the laser light is on, DO NOT STARE INTO THE BEAM
Star Shower light is intended to operate in temperatures from
-4°F to 95 °F (-20°C to 35°C). At or below freezing temperature,
Star Shower light may take up to 10 minutes to 20 minutes to
warm up and reach its full projection strength.
On/Off on the Light:
The on/off switch is found at back of the unit (fig. 1). Press the
button to switch on, then repeatedly press the button to cycle
through modes and switch off.
Fig. 1
Tap the On/Off button to cycle through mode settings
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Red and green together (Constant light)
Red (Constant light)
Flashing red
Alternating flashing red and green
Green (Constant light)
Flashing green
Alternating red, green, and red and green together (Constant light)
Flashing red and green together
