PANTONE 072 C
PANTONE 123 C
Support Line: 0333 030 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
Paper weight 60gsm
everyday solutions
™
Est. 1992
3) Lay one of the brackets on a flat surface. With the front metal edging
(2)
towards the pointed end
of the bracket
(3)
, arch the board so that it matches the curve of the bracket and insert the pre-
assembled shorter edge of board and seal into the groove on the bracket. Ensure that the ridges of
the back metal edging
(4)
slots directly in to the bracket
(3)
. Slot the remaining bracket
(3)
onto the
other short edge.
4) Using the 1x fixing screw
(6)
secure the front metal edge to the bracket
(3)
using the pre-drilled
locating hole on the side of the bracket. Using 1x fixing screw
(6)
secure the back metal edge
(4)
to the bracket using the pre-drilled locating hole on the side of the bracket. Repeat for the opposite
side. The unit assembly is now complete. Ensure that the unit is rigid before installing.
MOUNTING THE CANOPY
Place assembled canopy into position and mark the drill area through the holes on the canopy bracket.
Before drilling any holes ensure you are completely happy with the position, that there are no electrical
cables or pipes that can be damaged and that the position is not going to cause any obstruction of
possible injury. Where you have marked the four holes, use a 10mm bit to drill to a depth of 7cm.
With two people holding the canopy in place, insert the 4 x Expanding Bolts
(5)
through the brackets
and into the drilled holes. You may need to tap these home with a hammer or mallet.
Use a 13mm spanner to tighten the expanding bolts, ensuring the brackets are secured tightly to the
wall. For improved water resistance you can use a waterproof sealant around the edges of the canopy
board, but it is entirely optional.
Page 3
Page 4
