PANTONE 072 C
PANTONE 123 C
Dear Customer
Thank you for purchasing the 6-in-1 Retro Music System.
The 6-in-1 Retro Music System has a stereo record player for playing your 33’s, 45’s
and 78’s, a cassette deck and an AM/FM radio with fi ne tuning dial and integral aerial
for perfect reception. In addition, it features a front-loading CD player with clear digital
display allowing you to instantly fi nd your favourite track, a digital transfer function so
you can easily record all of your music onto your PC and a USB connection (software
included) to transfer into digital format ready to be played on a MP3 player.
LOCATION OF CONTROLS
1) Dial pointer
2) LCD display
3) Functions switch
4) Power LED indicator
5) Power on/off, Volume knob
6) Folder up button
7) Source button
8) Extra bass on/off button
9) Record button
10) CD door
11) FM/FM-ST switch
12) FM stereo LED indicator
13) Tuning knob
14) Remote sensor
15) Skip/search down button
16) Skip/search up button
17) CD door open button
18) Play/pause/stop button
19) USB socket
20) 3.5 mm headphone jack
21) Tape forward / eject button
22) Cassette door cover
23) Spindle adaptor
24) Turntable speed selector
25) Auto stop switch
26) Pick-up holder
27) FM wire antenna
28) 3.5mm Aux in jack
29) Line out socket (L/R)
30) AC cord
Paper weight 60gsm
everyday solutions
™
Est. 1992
Support Line: 0844 441 8448
For more innovative products from Easylife please visit:
www.easylifegroup.com
Caution:
Usage of controls or adjustments or performance of procedures other than those
specifi ed herein may result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualifi ed service
personnel.
Connection
1. Connect the power cord (30) to AC outlet.
2. Turn on the power (5) until the LCD display (2) with blue backlight is on.
3. Then switch the function selector (3) to “ Tuner “ function. If sound is coming from the
speaker, it means the unit is functioning normally. Now your system is ready to play the
music.
Listening to radio
Manual tuning
1. Select the function switch (3) to tuner mode
2. Tune to the required station by turning the tuning knob (13).
3. Adjust volume knob (5) to the desire volume level.
FM & FM-stereo reception
• With the FM /FM-ST switch (11) in the “ FM ” position programs are received in mono
mode. In particular when stereo signal are weak it is preferable to receive the program in
mono.
• Set the radio band selector (11) at “FM-St” position for receiving stereo programs. The
FM-stereo LED indicator (12) will light up to show fm stereo program is receiving.
Hints for best reception:-
- FM : the receiver has a built-in FM wire antenna (27) hanging at the rear cabinet. This
wire should be totally unraveled and extended for best reception.
Playing compact disc
•
Getting started
1. Switch the Function selector (3) to select “ CD/USB ” mode.
2. Press “Open/Close” button (17) to open the CD door (10).
3. Place a CD with the printed side facing up inside the tray & then close the CD door.
4. Focus search is performing, the LCD display (2) will show the total number of tracks &
total playing time.
•
Play / Pause / Stop mode
1. Press the “ Play/Pause/Stop ” button (18) to start playback, the fi rst track will start
playback.
2. To interrupt, press the “ Play/Pause/Stop ” button (18) once, the playing time will
freeze & fl ash on the LCD display (2). Press again to resume normal playback.
3. Press and hold the “ Play / Pause stop “ button (18) for over 2 seconds during
playback mode the system will go to stop mode.
LOCATION OF CONTROLS
1) Dial pointer
2) LCD display
3) Functions switch
4) Power LED indicator
5) Power on/off, Volume knob
6) Folder up button
7) Source button
8) Extra bass on/off button
9) Record button
10) CD door
11) FM/FM-ST switch
12) FM stereo LED indicator
13) Tuning knob
14) Remote sensor
15) Skip/search down
button
16) Skip/search up
button
17) CD door open button
18) Play/pause/stop
button
19) USB socket
20) 3.5 mm headphone jack
21) Tape forward / eject button
22) Cassette door cover
23) Spindle adaptor
24) Turntable speed selector
25) Auto stop switch
26) Pick-up holder
27) FM wire antenna
28) 3.5mm Aux in jack
29) Line out socket (L/R)
30) AC cord
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Precautions for use
Installation
•
Unpack all parts and remove protective material.
•
Do not connect the unit to the mains before checking the mains voltage and before all other connections have been
made.
•
Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Connection
1. Connect the power cord (30) to AC outlet.
2. Turn on the power (5) until the LCD display (2) with blue backlight is on.
3. Then switch the function selector (3) to “ Tuner “ function. If sound is coming from the speaker, it means the unit is
functioning normally. Now your system is ready to play the music.
Listening to radio
Manual tuning
1. Select the function switch (3) to tuner mode
2. Tune to the required station by turning the tuning knob (13).
3. Adjust volume knob (5) to the desire volume level.
FM & FM-stereo reception
With the FM /FM-ST switch (11) in the “ FM ” position programs are received in mono mode. In particular when
stereo signal are weak it is preferable to receive the program in mono.
Set the radio band selector (11) at “FM-St” position for receiving stereo programs. The FM-stereo LED indicator (12)
will light up to show fm stereo program is receiving.
Hints for best reception:
-
-
FM : the receiver has a built-in FM wire antenna (27) hanging at the rear cabinet. This wire should be totally
unraveled and extended for best reception.
1
LOCATION OF CONTROLS
1) Dial pointer
2) LCD display
3) Functions switch
4) Power LED indicator
5) Power on/off, Volume knob
6) Folder up button
7) Source button
8) Extra bass on/off button
9) Record button
10) CD door
11) FM/FM-ST switch
12) FM stereo LED indicator
13) Tuning knob
14) Remote sensor
15) Skip/search down
button
16) Skip/search up
button
17) CD door open button
18) Play/pause/stop
button
19) USB socket
20) 3.5 mm headphone jack
21) Tape forward / eject button
22) Cassette door cover
23) Spindle adaptor
24) Turntable speed selector
25) Auto stop switch
26) Pick-up holder
27) FM wire antenna
28) 3.5mm Aux in jack
29) Line out socket (L/R)
30) AC cord
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Precautions for use
Installation
•
Unpack all parts and remove protective material.
•
Do not connect the unit to the mains before checking the mains voltage and before all other connections have been
made.
•
Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Connection
1. Connect the power cord (30) to AC outlet.
2. Turn on the power (5) until the LCD display (2) with blue backlight is on.
3. Then switch the function selector (3) to “ Tuner “ function. If sound is coming from the speaker, it means the unit is
functioning normally. Now your system is ready to play the music.
Listening to radio
Manual tuning
1. Select the function switch (3) to tuner mode
2. Tune to the required station by turning the tuning knob (13).
3. Adjust volume knob (5) to the desire volume level.
FM & FM-stereo reception
With the FM /FM-ST switch (11) in the “ FM ” position programs are received in mono mode. In particular when
stereo signal are weak it is preferable to receive the program in mono.
Set the radio band selector (11) at “FM-St” position for receiving stereo programs. The FM-stereo LED indicator (12)
will light up to show fm stereo program is receiving.
Hints for best reception:
-
-
FM : the receiver has a built-in FM wire antenna (27) hanging at the rear cabinet. This wire should be totally
unraveled and extended for best reception.
1
LOCATION OF CONTROLS
1) Dial pointer
2) LCD display
3) Functions switch
4) Power LED indicator
5) Power on/off, Volume knob
6) Folder up button
7) Source button
8) Extra bass on/off button
9) Record button
10) CD door
11) FM/FM-ST switch
12) FM stereo LED indicator
13) Tuning knob
14) Remote sensor
15) Skip/search down
button
16) Skip/search up
button
17) CD door open button
18) Play/pause/stop
button
19) USB socket
20) 3.5 mm headphone jack
21) Tape forward / eject button
22) Cassette door cover
23) Spindle adaptor
24) Turntable speed selector
25) Auto stop switch
26) Pick-up holder
27) FM wire antenna
28) 3.5mm Aux in jack
29) Line out socket (L/R)
30) AC cord
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Precautions for use
Installation
•
Unpack all parts and remove protective material.
•
Do not connect the unit to the mains before checking the mains voltage and before all other connections have been
made.
•
Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Connection
1. Connect the power cord (30) to AC outlet.
2. Turn on the power (5) until the LCD display (2) with blue backlight is on.
3. Then switch the function selector (3) to “ Tuner “ function. If sound is coming from the speaker, it means the unit is
functioning normally. Now your system is ready to play the music.
Listening to radio
Manual tuning
1. Select the function switch (3) to tuner mode
2. Tune to the required station by turning the tuning knob (13).
3. Adjust volume knob (5) to the desire volume level.
FM & FM-stereo reception
With the FM /FM-ST switch (11) in the “ FM ” position programs are received in mono mode. In particular when
stereo signal are weak it is preferable to receive the program in mono.
Set the radio band selector (11) at “FM-St” position for receiving stereo programs. The FM-stereo LED indicator (12)
will light up to show fm stereo program is receiving.
Hints for best reception:
-
-
FM : the receiver has a built-in FM wire antenna (27) hanging at the rear cabinet. This wire should be totally
unraveled and extended for best reception.
1
LOCATION OF CONTROLS
1) Dial pointer
2) LCD display
3) Functions switch
4) Power LED indicator
5) Power on/off, Volume knob
6) Folder up button
7) Source button
8) Extra bass on/off button
9) Record button
10) CD door
11) FM/FM-ST switch
12) FM stereo LED indicator
13) Tuning knob
14) Remote sensor
15) Skip/search down
button
16) Skip/search up
button
17) CD door open button
18) Play/pause/stop
button
19) USB socket
20) 3.5 mm headphone jack
21) Tape forward / eject button
22) Cassette door cover
23) Spindle adaptor
24) Turntable speed selector
25) Auto stop switch
26) Pick-up holder
27) FM wire antenna
28) 3.5mm Aux in jack
29) Line out socket (L/R)
30) AC cord
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Precautions for use
Installation
•
Unpack all parts and remove protective material.
•
Do not connect the unit to the mains before checking the mains voltage and before all other connections have been
made.
•
Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Connection
1. Connect the power cord (30) to AC outlet.
2. Turn on the power (5) until the LCD display (2) with blue backlight is on.
3. Then switch the function selector (3) to “ Tuner “ function. If sound is coming from the speaker, it means the unit is
functioning normally. Now your system is ready to play the music.
Listening to radio
Manual tuning
1. Select the function switch (3) to tuner mode
2. Tune to the required station by turning the tuning knob (13).
3. Adjust volume knob (5) to the desire volume level.
FM & FM-stereo reception
With the FM /FM-ST switch (11) in the “ FM ” position programs are received in mono mode. In particular when
stereo signal are weak it is preferable to receive the program in mono.
Set the radio band selector (11) at “FM-St” position for receiving stereo programs. The FM-stereo LED indicator (12)
will light up to show fm stereo program is receiving.
Hints for best reception:
-
-
FM : the receiver has a built-in FM wire antenna (27) hanging at the rear cabinet. This wire should be totally
unraveled and extended for best reception.
1
EL6174_6_in_1_Music_System-8pp_A5-CMYK.indd 4-5
18/08/2015 09:45
