PANTONE 072 C
PANTONE 123 C
Customer service: 0871 855 6100
For more innovative products from Easylife please visit:
www.easylifegroup.com
ASSEMBLY
NOTE
: Before using the product for the first time, disassemble and thoroughly wash and dry all parts
except the Base (Cross Blades Set, Rubber Gasket, Tall Cup and On the Go Lids).
WARNING
: Ensure the product is unplugged from the electrical outlet before assembling it. Handle
the Blades with care as they are extremely sharp. Use caution when attaching, detaching,
cleaning, or storing the Blades.
BLEND
: 1. Ensure the product is unplugged from the electrical outlet.
2. Place the Base on a flat, level, stable surface.
3. Fill the Tall Cup with the food that you wish to Blend.
4. Screw the Cross Blade Set clockwise onto the Tall Cup until secure.
NOTE
: Ensure that the rubber gasket, located on the inside bottom edge of the blade assembly, is
in place.
5. Turn the Tall Cup Set Assembly so that the Blades are on the bottom. Attach the assembled
Tall Cup Set by aligning the three tabs on the outside of the Tall Cup with the three notches
on the top inner edge of the Base.
6. Plug the product into a standard 220-240 volt AC electrical outlet.
7. Press down and turn counterclockwise to begin processing food. To prevent product
overheating, limit continuous operation to 30 seconds at a time.
8. To stop processing, press down and turn clockwise. Wait until the Blades stop completely
before removing the Cup from the Base or before removing any food contents.
9. Unplug the product from the electrical outlet when it is not in use or is left unattended.
NOTE
: This product comes with an On-the-go Lid, Which fits you to take out and for storage.
ON-THE-GO LID
: After you finish blending your drink, wait until the blade completely stops before
removing the Cup Set from the Base. Then turn the Cup Set upside down, so that the
blade set is on the top, and then screw the blade set counterclockwise. Screw the
On-the-go Lid clockwise onto the Tall Cup for storage and for taking outside.
Paper weight 60gsm
CAUTION
: - When blending hot liquids, cover with a cloth or towel before unscrewing
blade assembly. Slowly unscrew the blade assembly to release any
pressure that may have built up during blending. This will help to prevent
a burn/scald hazard.
- For liquid ingredients, do not fill the containers to their maximum capacity.
Overfilling the Cups could result in spillage, causing burns and/or
property/product damage. A maximum of ¾ of the capacity
is recommended.
- When blending ice please make sure a minimum 110ml of water or any
other liquid is added before use.
CLEANING AND MAINTENANCE
WARNING
: - To avoid the risk of electrical shock, always ensure the product is
unplugged from the electrical outlet before assembling,
disassembling, relocating, servicing, or cleaning it.
- Handle the Blades with care as they are extremely sharp. Use
caution when attaching, detaching, cleaning, or storing the Blades.
• Always clean the product immediately after each use.
• Wash all parts except the Base in warm, soapy water; rinse, and dry thoroughly.
• Clean the Base by wiping it with a damp cloth. To avoid damage to the product, do not
immerse the Base into water or other liquids or place it in a dishwasher.
• To avoid damage to the product, do not use abrasive cleaners or scouring pads to clean the
product parts.
• Reassemble the product before placing it into storage (reference the “To Assemble” section).
• Store the product in a cool, dry place.
