Customer service: 0871 855 6100
For more innovative products from Easylife please visit:
www.easylifegroup.com
Battery
The battery in original state has about 50% electricity quantity
and you can use it after unpacking. It performs best after full
charge/discharge for the first three times.
Charging the battery
• Plug the charger into wall socket.
• Insert the plug of the charger into the bottom of mobile phone
(keep the surface with arrow upwards).
• If the mobile phone is on when being charged, the electricity
quantity indicator on upper right corner of the screen will
be flashing circularly; if the mobile phone is off when being
charged, a charging indicator image will appear on the
screen which indicates the battery is being charged. If the
mobile phone is still used when battery is low, the charging
indicator will appear after being charged for a while.
• When charging is finished, there will be one image displayed
on the screen which indicates that charging has finished. If
the mobile phone is on, the battery status indicator on upper
right corner of the screen is complete and won’t flash. It may
take 3-4 hours to fully charge the battery. It is normal that the
battery, mobile phone and charger get hot when charging.
• Disconnect the AC outlet from mobile phone and charger
when charging is complete.
Note:
• Use charger approved by manufacturer to charge in
ventilated places with temperature between 5°C and 40°C.
It is dangerous to use an unauthorized charger and you will
also violate the warranty clause.
• Please charge the battery in time if the mobile phone
automatically switches off or indicates “Low battery”. If the
battery hasn’t been run out before charging, the charging
time will be shortened automatically.
• The standby and call time provided by manufacturer are
based on ideal working environment. The working time
of battery depends on network status, environment and
operating method in practice.
• Make sure the battery is installed properly before charging
and don’t remove the battery during charging.
• Disconnect the charger from mobile phone and power supply
after charging.
• If you don’t disconnect the charger from power supply and
mobile phone, the mobile phone will be charged again (after
about 5 to 8 hours) and the energy of the battery is wasted
to a certain degree. It is not recommended because it will do
harm to the performance and service life of the battery.
Connecting to network
SIM card
You must insert at least one valid SIM card before using your
mobile phone. SIM card is the key for you to access digital
GSM/GPRS network.
All information about network connection and call initialization,
as well as the names and telephone numbers of Contacts and
short messages you have received and saved, are recorded
in the metal surface area of the SIM card. You can remove the
SIM card from your mobile phone and insert it into any other
GSM mobile phone (the new mobile phone will read the SIM
card automatically).
Do not touch the metal surface area and keep the SIM card
away from electricity and magnetism to avoid losing or
damaging the information saved in SIM card. You can’t access
GSM/GPRS network if the SIM card is damaged.
Warning: Please switch off the mobile phone before
removing SIM card. Inserting or removing SIM card with
external power supply is prohibited, otherwise the SIM
card may be damaged.
