PANTONE 072 C
PANTONE 123 C
Customer service: 0844 441 8448
For more innovative products from Easylife please visit:
www.easylifegroup.com
Dear Customer
Thank you for purchasing the Eco Heaters.
Keep warm for less with these space-saving, money-saving heaters. Highly effi cient,
they generate more heat from less electricity. Highly versatile, they’re ideal for
providing a secondary, ambient source of heat. There’s a 60W model for utility
rooms, passages and wardrobes; a 120W - ideal for bedrooms and a 180W for larger
rooms and conservatories. In addition, they are rated IP55 for enhanced water
resistance and each heater comes with a protective cover. Which means you can
use your Eco-Heater in a shed, garage or the damp atmosphere of a greenhouse (but
not a bathroom). Fitted with indicator light, safety guards and 1.1m power leads, our
white enamel Eco Heaters are supplied with easy-fi t wall-mounting brackets.
Paper weight 60gsm
everyday solutions
™
Est. 1992
INSTALLATION
This heater must be installed in a horizontal position only.
Please do not mount it vertically.
Before installation please check you have all the parts listed below.
4 x Small screw
8 x Large screws with wall plug
2 x Wall attachments
1 x Tube heater
1 x Guard
Secure the Eco Heaters to the Wall Attachments, and screw in place with Small Screw
Hold the heater against the wall and mark the position of the fi xing holes. If fi xing to a studded wall, or a
wooden surface, use the large screw and wall plug. If the wall is hollow, or you are drilling into masonry,
using the pilot holes as guide, drill again using a 6.5mm drill bit and insert a wall plug into each hole.
Once holes are prepared, mount the Tube and secure. Then position and fi x the Guard
Now plug into a mains wall socket. When you switch the wall socket on, the red indicator light will switch on.
And your heater is now on. To turn your heater off, switch the wall socket off, or unplug.
PLEASE NOTE:
• The Eco Heaters can not be used in the bathroom or any area where it can get wet.
• After switching on for the fi rst time, the element may emit a vapour/smell. This is completely normal and
should pass in a few minutes.
• This heater is supplied with a guard. It is recommended that the guard is used at all times as the heater
gets very hot in use.
MAINTENANCE
• Ensure the unit is switched off and cold and wipe with a soft damp cloth and fi nish with a dry cloth.
• Do not use any abrasive cleaners.
IN6372_Energy_Heaterss-4pp_A5-CMYK.indd 4-5
25/08/2015 14:40
