EasyIO Sedona, Быстрый старт

Страница: 7 / 16

EasyIO Quick Start 01 - Sedona
7
Sedona Workbench
Assuming you have successfully installed the Sedona workbench into the Niagara workbench, you can
now get started to connect to a Sedona controller.
In this user guide, Niagara Ax 3.7.106 is used. Sedona workbench installed is Sedona Bundle 1.2.28.4.
Step 1
To connect to a Sedona controller, go to File>Open>Open Device.
Put in the IP address of the device you are connecting.
Default IP address for EasyIO 30P
IP address
: 192.168.10.10
Subnet Mask : 255.255.255.0
Default IP address for EasyIO FG Series
IP address
: 192.168.10.11
Subnet Mask : 255.255.255.0
For both models, username is “admin” and password is “blank” (no password)