Simplified Setup Guide for PXBKB Keypad
Setting Relay 1’s time – 0 – 99 Seconds:
Enter the admin mode by keying in the admin code twice (the yellow LED should be solid). Press
then
(the yellow LED should be flashing).Then key in the 2 digits which represent the
seconds the relay will hold open / closed for. I.E. ‘05’ for 5 seconds. If you want the relay to latch
open / closed then enter ‘00’ (this mode will require you to enter the user code in to open the
relay and then a second time to close the relay).
Press the # to exit the programming mode.
Restore Keypad back to Factory Settings:
Enter the admin mode by keying in the admin code twice (the yellow LED should be solid). Press
then
(the yellow LED should be flashing). Next press
twice. You should hear a single
resonating beep
. This indicates that all user codes have been cleared.
Next press
then
(the yellow LED should be flashing) and press
twice. You should hear
another single resonating beep
. This indicates that all settings have been restore back to
factory values.
Press the # to exit the programming mode.
Wiring
Diagram:
