Easydoor VM 7T BM, Руководство пользователя

Страница: 8 / 11

4.5 Screen Setting
4.6 Restore to Default
When the Monitor is in monitoring or talking
state, Press
Adjust
icon to enter
screen setting page.Touch any item you
want,then touch
to decrease or
increase the value.Settings will be performed
immediately. Press
icon to exit out the
page.
The restore to default function allows the
user to recover the settings to factory setting.
Note that the restore to default operation will
not change the time setting and the datas on
buit-in memory or SD card.
Enter home screen page(refer to 4.1),then
touch
User Setup
icon to enter the
setting page,press Restore to default item,
the default settings will be loaded. press
Home
icon to return to home screen page.
5
Brightness
color
scene
Talk Volume
Adjust Return
Adjust -
Door Station
Call tone
Intercom
Call tone
DoorBell
Call tone
Clock
Ring
Volume
Night Ring
Volume
Refault to
Default
09/30/2010 Thu.16:41 Home
● Touch
Installer setup
icon,a digital
keypad and installation setting will be
showed on screen.
● Input code number by touching the digital
keypad.According to the left instructions,
8010 and 8011 are used to set the unlock
mode(0 and 1). 8021~8029 are used to set
the unlock time (1s~9s) .use to cancel
the input,and use to save the setting.
Touch icon to return last page .
Code Number:[----]
[0010]#:Remove all remote control
[0011]#:Add remote control
[8000]#:Set as master unit 0
[8001]#:Set as slaver unit 1
[8002]#:Set as slaver unit 2
[8003]#:Set as slaver unit 3
[8004]#:Set as guard unit
[8005]#:Set as not guard unit
[8010]#:Set lock mode to 0
[8011]#:Set lock mode to 1
[8021]#:Set the lock time of 1s
[8022]#:Set the lock time of 2s
[8023]#:Set the lock time of 3s
[8024]#:Set the lock time of 4s
[8025]#:Set the lock time of 5s
[8026]#:Set the lock time of 6s
[8027]#:Set the lock time of 7s
[8028]#:Set the lock time of 8s
[8029]#:Set the lock time of 9s
1
4
7
8
0 9
6 5
2 3
Cancel
Installation settings:
-6-