Easydoor DJ 1T, Руководство пользователя

Страница: 12 / 16

-10-
6.Setup
ON(1)
=
OFF(0)
=
6.1 DIP Switches Settings of Doorstation
Total 2 bits on the DIP switches can be configured.The switches can be modified etther before or after installation.
Bit state Descriptions
ON
1 2
Default setting, ID = 0(00), set to the first Door Station.
ON
1 2
ID = 1(10), set to the second Door Station.
ON
1 2
ID = 2(01), set to the third Door Station.
ON
1 2
ID = 3(11), set to the fourth Door Station.
6.2 DIP Switches Settings of Monitor
There are 6 bit switches in total. The DIP switches are used to configure the User Code for each Monitor.
Bit-6 is line terminal switch, which have to be set to ON if the Monitor is in the end of the line(bus), otherwise set to OFF.
Bit state Setting Bit state Setting
ON
1 2 3 4 5 6
The monitor is
not at the end
of the bus.
ON
1 2 3 4 5 6
The monitor is
at the end of
the bus.