1. Autofocus
(exposure reading) and shooting mode change. To change shooting mode, keep the
button pressed until the icon changes on the display. In Ph. Mode, the timer shooting ends.
2. Shooting:
Mode (Re): When the button is pressed, autofocus occurs, when the button is released, the shot will
be triggered.
Mode (Pr): When the button is pressed, first the autofocus is obtained and then the shutter. (if the lens
is already in focus, direct shooting will occur).
Mode (Ph): When the button is pressed, the timed shutter for the photogrammetry function is triggered
(Mode Activated on Demand).
10. Switch Button
, by pressing once you pass to the Switch 1, and a blue led lights up. Pressing the
button once more switches to the Switch 2 and a yellow LED lights up. Pressing a third time turns off
the LED and returns to the main mode. Keeping the button pressed for 3 sec. The Housing Menu
mode is activated and a purple LED lights up. Follow the numbering of the buttons in this manual to
navigate the menus. To exit the menu mode, press button 11 "on / off".
monitor housing is switched on (Easydive logo). It is possible to turn off or turn on the camera only, by
pressing the button once quickly. To turn off both the housing and camera, press and hold the button
until it turns off.
Switch Mode 2
Easydive - Via dell'Industria 13 int 6, 48015 Cervia (RA) - Italy
[email protected] - +39 0547 962923 - +39 338 9994219
Buttons Panel LeoR
Yellow Led Actived
Z5
|
Z50
|
Z6
|
Z6 II
|
Z7
|
Z7 II
In
video
mode,
the
button
activates
or
deactivates
video
recording
(REC)*.
11.
Housing
and
camera
"on
/
o
ff
"
button
**.
To
switch
on,
keep
the
button
pressed
until
the
* The Video Mode must be selected before inserting the camera inside the housing.
**
For
improved
management
of
camera
shutdown,
the
purchase
of
a
compatible
exteral
battery
is
recommended.
8.
Metering Mode.
9.
Flash Mode.
3. Focus point shift,
Up
Arrow.
4.
Focus
point
shift,
Left Arrow.
5.
Focus
point
shift,
Right Arrow.
6.
Focus
point
shift,
Down Arrow.
7.
Focus
point
shift,
shift the point to the Center.
