8
866-235-5029
USA
AFTER SALES SUPPORT
Heated Neck and Shoulder Massager
Instructions
Adapter Instructions
1. Insert adapter plug into the control pad. (Fig. 1)
2. Plug into a AC 120-volt outlet.
3. This unit incorporates a wire frame allowing you
to contour the unit to your neck. Place massager
on your neck and mold the wire framing to
desired position. (Fig. 2)
4. To activate the massage action, press the massage
button on the control pad. (Fig. 3)
5. Press once for low intensity, a second time for high
intensity and a third time to deactivate.
6. To activate the heat action, press the heat button
on the control pad. (Fig. 3) Press a second time
to deactivate.
Optional Battery Instructions
NOTE:
Batteries will only operate the massage function.
You must use the adapter to activate the heat function.
1. Locate the zipper on the back of the unit.
2. Unzip to expose the battery compartment, remove
lid. (Fig. 4)
3. Insert 4 “AA” batteries. Proper battery orientation
is noted inside the battery compartment housing.
4. Replace the cover and zip the back portion back up,
making sure both zipper ends are touching each
other to ensure zipper is closed properly.
5. To activate the massage action, press the massage
button on the control pad. (Fig. 3)
6. Press once for low intensity, a second time for
high intensity and a third time to deactivate.
NOTE:
The heat feature is not available when operated
with battery.
In case of pregnancy, diabetes, pacemaker
use, illness or any medical condition, consult your doctor
before using massager.
Instructions
Fig. 1
Fig. 2
Fig. 3
Fig. 4
