Infrared quartz heater
AFTER SALES SUPPORT
888 775 0202
11
MODEL: EHQH15W PRODUCT CODE: 40186-14 12/2014
Description
Button to Use
Indicator
Turn the heater to the “On” position.
Press the timer button on the
heater’s control panel or on the
remote control. The digital display
will change from the “temperature”
to the “hours” option for the timer.
Description
Button to Use
Indicator
Turn the heater on by pressing
the
Power
button on the control
panel or remote control.
Press the
Mode
button to choose
between two heat modes. High
mode uses 1500W, Low mode
uses 1000W.
Adjust the desired temperature
by pressing the
Temp. +/Temp. −
buttons on the control panel or
remote control.
Turn the heater off by pressing
the
Power
button on the control
panel or remote control.
Operation
The master power switch is located at the back of the unit. This must be turned on for the unit
to function. When this is in the off position, zero power will be supplied to the unit.
Before Use
Carefully remove your heater from the box. Save the carton for off-season storage. Put the
heater on a flat and stable surface. Make sure the unit is in the off position before plugging
the heater into the outlet. Plug the cord into a 120V AC/60Hz electric outlet. Only operate the
heater in an upright position with caster wheels attached.
Chapter 4 - Use
Setting the Power Off Timer Function
Power
Power
Temp.
Mode
Timer
Temp.
NOTE
:
Once the unit has been turned off, the heating element will stop working. However, the
fan will continue working to cool down the heating element. The digital display will show a 60
second countdown. This is normal and you do not need to take any further action. DO NOT
turn the master power switch (located at the back of the unit) to the off position during this time.
NOTE
: The power “Off” timer function
can only be set while the heaters display is in the “on” position.